青年中文閥板的英文
英文翻譯
Valve plate
重點詞匯
閥板───Valve plate
雙語使用場景
Mainly by the main valve seat, the main valve plate, piston, springs and other parts.───主閥主要由閥座、主閥盤、活塞、彈簧等零件組成。
The output pressure depends on the angle of the valve plate and is influenced by loads.───液壓變壓器輸出壓力由配流盤控制角度決定,同時受負載大小的影響.
The valve plate is made of air gasket type valve plate.───閥盤結構為空氣墊型膜式閥盤.
Magnetic valve seat, diaphragm and valve plate combined design.───磁性閥座 、 覆膜閥片組合設計.
The output pressure is increased with the increment of the angle of valve plate.───液壓變壓器輸出壓力隨控制角度的增加而增大.
The simulation of the valve plate has been worked, and it can be used as the direction for the design of SCCS and the unloader force.───對該系統中氣閥閥片的運動規律進行了模擬，對可調回流氣閥的機構和加載力設計起了指導作用。
This kind of valve is comprised of piston assembly, spring, valve plate assembly and center pipe.───這種閥主要由活塞總成、彈簧、閥板總成及中心管等組成。
Instead, the motor rotate reversely , push rod ( rod ) push out, the valve plate closes, stops discharging.───反之, 電機反轉, 推桿 ( 活塞桿 ) 推出, 閥板關閉, 停止卸料.
英語使用場景
Instead, the motor rotate reversely , push rod ( rod ) push out, the valve plate closes, stops discharging.
The simulation of the valve plate has been worked, and it can be used as the direction for the design of SCCS and the unloader force.
If the hydraulic noise in the, valve plate is required to be eliminated, the characteristics of preloading and pre-releasing of the cylinder must be hyperbolic type.
The original design of valve plate to open the gas valve is hanging in the channel, the possession of an effective diameter about 20%.
When in use, the indicating pointer of a valve plate is rotated to point to some branch pipe on the dial plate, and the liquid of the liquid inlet main pipe flows to the branch pipe.