fillet weld的意思

fillet weld中文翻譯：

角焊縫，填角焊，貼角焊

相似詞語短語

fillet welds───角焊；填角焊；填角焊接

fillets weld───角焊縫

filleted weld───角焊縫

filleting weld───角焊縫

to fillet weld───角焊縫

filled gold───填金

filleted───adj.切成片的；v.把…切片（fillet的過去分詞）

filled golds───填金

fillet steak───菲力牛排；里脊扒；里脊肉牛排

雙語使用場景

weld can be divided into four types: butt weld, fillet weld, plug weld and end weld.───焊縫可分為對接焊縫、角焊縫、塞焊縫和端接焊縫四種。

The influences of strength matching on fillet weld were analyzed. The relationships among fillet weld size, thickness of base metal and matching coefficient of strength were established.───分析了強度匹配對角焊縫設計的影響，建立了角焊縫焊腳尺寸與板厚，強度匹配系數之間的關系，討論了強度匹配選擇的依據。

By analyzing and discussing design of fillet weld connection, a comment is presented and some useful Suggestions on design of fillet weld connection are given.───通過對角焊縫連接設計的分析討論，提出一個值得探討的問題，并就角焊縫連接設計給出一些有益的建議。

Grooving in the skirt of coke drum is able to lighten the stiffness impact on the skirt and reduce the thermal stress on its fillet weld.───在焦炭塔裙座上開設柔性槽能夠減輕裙座剛度影響，降低裙座角焊縫處熱應力。

EXAMINATION RECORD FOR INTERGRANULAR CORROSION, HARDNESS, METALLOGRAPHY, FILLET WELD AND WELD CHEMICAL COMPOSITIONS. . . . . .───晶間腐蝕，硬度，金相，角焊縫，焊縫化學成份檢驗記錄表

the method of detecting T-type fillet weld lack of penetration height was discussed using ramp probe in the wing.───探討了用斜探頭在翼板上檢測T型角焊縫未焊透高度的方法。

Welding consumables - Test methods - Testing of positional capability of welding consumables in a fillet weld───焊熔.試驗方法.圓角焊接焊接熔化位置容量的試驗

Description on Analysis of Dangerous Defects and Nondestructive Testing Method of Fusion Fillet Weld of Anchor Box for Cable Stayed Bridge───斜拉橋錨箱熔透角焊縫危害性缺陷分析和探傷方法介紹

Welding consumables - Test methods - Part 3: Testing of positional capability of welding consumables in a fillet weld───焊接耗材試驗方法第3部分：角焊接中焊料定位能力的試驗

英語使用場景

Butt welds qualify full and partial penetration butt welds and fillet welds. Fillet weld tests shall be required where this is the predominant form of production welding.

The product contains compound antioxygen and proper rare earth, which have obvious effect on increasing weather fastness of non-conventional PVC and the strength of fillet weld .

Radiographic examination was performed with portable X-ray fault detector appling the special radiographic technique for fillet weld of heat exchange tube-tubeplate.

Grooving in the skirt of coke drum is able to lighten the stiffness impact on the skirt and reduce the thermal stress on its fillet weld.