青年中文between failures的意思
between failures中文翻譯：
二次故障之間
相似詞語短語
between whiles───不時的，時常
between times───偶爾，有時候
betweenwhiles───adv.偶而；余暇
power failures───電源故障，電源中斷；斷電（powerfailure的復數）
between two fires───遭兩面夾攻；左右為難
between；ains───n.間腦
betweentimes───adv.有時；間或；在中間的時間
雙語使用場景
Even though the mean time between failures of the hardware hasn't changed, the backups and scripts put in place mean that the data is safe and that you can quickly rebuild the environment, if needed.───盡管硬件平均故障時間沒有改變，做足備份和腳本工作可確保數據是安全的，您可以根據需要快速重建環境。
If you know the mean time between failures and the mean time to recovery, e.g. for the hardware, use the calculations in this section.───如果知道失效之間的平均時間和平均恢復時間(例如對于硬件)，則使用這一部分中的計算方法。
Theoretic calculations show that with redundancy control the mean-time-between-failures(MTBF) of the vacuum system is doubled at least.───通過計算，冗余控制可使整個負壓系統的平均無故障工作時間至少增加一倍。
That means standardized equipment and software with a long 'Mean Time Between Failures' and short 'Mean Time To Repair'.───這意味著標準化的設備和軟件具備長的“平均無故障時間”和短的“平均維修時間”。
A study is focused on the distribution model of intervals between failures, thus providing the reliability functions.───重點研究了數控車床故障間隔時間的分布模型，并給出了可靠性特征量函數。
Specifically, you should consider the mean time between failures (MTBF) of each device in the critical path.───具體地說，應考慮關鍵路徑中每個設備的平均故障間隔時間（MTBF）。
Mean time between failures (of a unit) mean time between failures of auxiliary equipment───（輔助設備的）平均無故障可用小時
英語使用場景
The proportional allocation factor and the allocation formulae expressed in terms of failure rates and mean time between failures respectively are given.
If you know the mean time between failures and the mean time to recovery, e.g. for the hardware, use the calculations in this section.
GO reliability analysis of a YAG laser system was used to determine the mean time between failures and other important system reliability data.
Even though the mean time between failures of the hardware hasn't changed, the backups and scripts put in place mean that the data is safe and that you can quickly rebuild the environment, if needed.
Mean time between failures is the average elapsed time between the beginning of one failure and the beginning of the next.
Repairable systems reliability is an important branch of the reliability theory. For a repairable system, availability, reliability and mean time between failures are all important indexes.
The mean time between failures (MTBF) for the controller of the system can be over 10 years.
A study is focused on the distribution model of between failures, thus providing the reliability functions.
The reliability of mechanism of universal machine, time between failures and the reliability problems as the sudden and gradual failures exist simultaneously are discussed.