quenched steel的意思

quenched steel中文翻譯：

淬火鋼；[材]淬硬鋼；硬化鋼

淬火鋼，淬硬鋼，硬化鋼

相似詞語短語

clenched teeth───咬緊牙關

French heel───法式鞋跟

benched press───舉重練習凳；臺式壓床

cold steel───n.冷兵器，鋼制武器；（電影名）狂龍特警

end of steel───鋼的端部

magnet steel───[材]磁鋼；磁性鋼

nickel steel───n.[材]鎳鋼

punched tape───穿孔紙帶

punched tapes───穿孔紙帶

雙語使用場景

When such a quenched steel is tempered, structures with mechanical properties intermediate between those of the slowly cooled and the quenched conditions are formed.───當這樣的淬火鋼被回火的時候，就會形成機械性能介于那些緩慢冷卻和急速冷卻之間的結構。

hardness data of quenched steel under different conditions were collected utilizing austempering tests.───利用等溫回火實驗，采集了淬火鋼在不同條件下回火時的硬度數據。

grinding force ratio in grind-hardening consists with the grinding force ratio in grinding quenched steel, and is bigger than the grinding force ratio in grinding unquenched steel.───研究發現，磨削淬硬的磨削力比值范圍與磨削淬火鋼的磨削力比值范圍相一致，大于磨削普通鋼的磨削力比值范圍。

Nonlinear Fitting Function of Quenched Steel Austempering Hardness and Application───淬火鋼等溫回火硬度值的非線性擬合函數的研究

Effect of Cooling Rate on Microstructures and Properties of Directly Quenched Steel───冷卻速率對直接淬火鋼組織和性能的影響

Experimental Research on Grinding Hardening Effect of Non -quenched Steel───非調質鋼的磨削強化試驗

Diffusion of atoms during solid-state welding of surfaces laser quenched steel───鋼激光淬火后固態焊接過程中的原子擴散

英語使用場景

The results show that, in cutting teat, best cutting speed exists for different quenched steel.

The mechanism of cutting force, cutting temperature and tool wear in the machining of quenched steel and nickel based high temperature alloy with ceramic tools are analyzed in the paper.

Sentencedict.com try its best to collect and create good sentences.

The hardness data of quenched steel under different conditions were collected utilizing austempering tests.

The grinding force ratio in grind-hardening consists with the grinding force ratio in grinding quenched steel, and is bigger than the grinding force ratio in grinding unquenched steel.

The cutting experiments show that in cutting of quenched steel the tool life of this cutter is longer than that of uncoated cutting tool.

When such a quenched steel is tempered, structures with mechanical properties intermediate between those of the slowly cooled and the quenched conditions are formed.

The test has been demonstrated that the boron segregation at austenite grain boundaries in quenched steel is a non-equilibrium grain boundary segregation phenomena occurred during cooling.

Grind - hardening of non - quenched steel was performed with creep feed grinding mode and different cooling conditions. Microstructure and properties of the surface hardened layer were compared.