fillet welding的意思

fillet welding中文翻譯：

角焊；[機]角接焊

（填角焊）貼角焊; 條焊

相似詞語短語

fillet weld───角焊縫

fillet welds───角焊；填角焊；填角焊接

fillets weld───角焊縫

filter feeding───濾食性攝食

flash welding───[機]閃光焊

forge welding───[機]鍛焊

filter feedings───濾食性攝食

cold welding───[機]冷焊；冷壓焊；冷焊合

filleted weld───角焊縫

雙語使用場景

Used for down hand welding and flat fillet welding on general low - carbon steel structures.───適用于船體結構低碳鋼和其他相應等級的普通低碳鋼的平焊、平角焊.

Fillet welding may increase the welding area to ensure the strength of welding pieces.───倒角焊接可增大焊接面積,確保焊接件的強度.

At last, the fatigue crack in the experiment and the main influential factor of fatigue strength of fillet welding seam was studied.───最后，對疲勞試驗中有關裂紋以及影響焊縫疲勞強度的主要原因進行了探討。

Non-watertight weld joints and fillet welding for stiffening member shall be painted after block inspection.───加強構件的非水密焊接接合和填角焊應該在檢查完分段后進行噴漆。

The key points of fillet welding and NDT arc introduced form practical experience steam drum.───從實際焊接工藝入手,重點介紹了管座角焊縫的焊接與探傷的要點.

英語使用場景

Used for down hand welding and flat fillet welding on general low - carbon steel structures.

Non - watertight weld joints and fillet welding for stiffening member shall be painted after block inspection.

The problems occurred in ultrasonic flaw detection tests of decentralized downcomer fillet welding seats and the flaw detecting experience obtained in these tests are also introduced.

Fillet welding experiments on the T-joint and the stiffened plate have verified that its forecasting capability is quite good.