shear force的意思

shear force中文翻譯：

[力]剪力，剪切力

相似詞語短語

shear zone───剪切區域；[地質]剪碎帶

spent force───消耗的兵力

swear for───保證；擔保

the force───軍力；警察；原力（歌名，TheForce）；鐵警雄風（電影名，TheForce）

weak force───弱作用力；弱核力；弱相互作用

sheer force of───純粹的力量

nuclear force───[物]核力

special force───特殊力量

spent forces───消耗的兵力

雙語使用場景

Abstract: shear force is interrelating with width and thickness of plate and obliquity of knife-edge.───文摘：斜刃剪切時，剪切力的大小與板料的寬度、厚度及斜刃傾角有關。

Shear force is interrelating with width and thickness of plate and obliquity of knife - edge.───斜刃剪切時,剪切力的大小與板料的寬度、厚度及斜刃傾角有關.

Shear force is implicit in the development of bending moments.───桿中的剪力在彎矩的推導中是不明顯的.

For any load the function from load is in multiplication shear force by antisymmetry load.───任意荷載的作用含反對稱荷載分量的圖乘剪力的作用.

Shear force is interrelating with width and thickness of plate and obliquity of knife-edge.───剪切時，剪切力的大小與板料的寬度、厚度及斜刃傾角有關。

Abstract: Shear force is interrelating with width and thickness of plate and obliquity of knife - edge.───文摘: 斜刃剪切時,剪切力的大小與板料的寬度、厚度及斜刃傾角有關.

Shear force diagrams are drawn in the manner indicated, with negative shears below the baseline.───剪力圖按指明的方式來畫, 負剪力畫在基線以下.

The new self suction phase - dispersing reactor can produce good dispersing effect at low shear force.───自吸式相分散器對溶液的剪切力較低,分散效果好.

英語使用場景

The main path of ultrasonic sludge disintegration was the mechanical effect of hydraulic shear force.

The purpose of this paper is to find the distribution laws of the shear force between vertical shaft and surface soil, and to lay a foundation for mechanical model of shaft in soil.

Abstract: Shear force is interrelating with width and thickness of plate and obliquity of knife - edge.

Shear force is implicit in the development of bending moments.

Formula for internal resistance ratio under a quick section - load, expressions on sectional flexural torque and shear force when rod bent are given.

The design curves of equivalent damping ratio to the brace stiffness, and ratio of maximum damping force of the damping device to the inter-story yield shear force of the structure are proposed.

Shear force is interrelating with width and thickness of plate and obliquity of knife - edge.

Shear force diagrams are drawn in the manner indicated, with negative shears below the baseline.

The dynamics analysis of shear structure mainly includes the calculation of the maximum shear force, shear angle and shear power, which provides the basis for choosing motor.