reflow soldering的意思

reflow soldering中文翻譯：

再流焊；[機]回流焊接

相似詞語短語

reflowering───v.（使）再開花

resoldering───分辨率

beflowering───下降前

deflowering───vt.摧毀…的花；奪去（少女）貞節；吸取精華；采花

fellow soldier───戰友

reconsidering───vt.重新考慮；重新審議；vi.重新考慮

reflooding───再淹沒

bepowdering───vt.灑粉；用粉涂覆；在……上涂粉

bewildering───adj.使人困惑的；令人產生混亂的；v.使迷惑（bewilder的ing形式）

雙語使用場景

After reflow soldering and restored at room temperature , they meet the characteristics listed below.───經過回流焊并冷卻至室溫后,電容器的特性符合下表的要求.

Adapted to the reflow soldering.───適應于回流焊接.

Suitable for SMT craft reflow soldering.───適用于回流焊SMT工藝.

Delamination caused by electrical - over - stress ( EOS ) and moisture expansion during reflow soldering have shown different delamination patterns.───由過電應力 ( EOS ) 和再流焊中的水汽膨脹引起的分層會顯示出不同的失效模式.

A potential reflow method - laser reflow soldering was expatiated in detail.───著重闡述了一種極具潛力的再流焊方法 ——— 激光再流焊.

The product has good heat durability that withstands lead - free compatible reflow soldering conditions.───符合無鉛化回流焊接條件,具有耐高溫性.

The techniques multi - layer substrate was developed , and the repeated reflow - soldering problem was also solved.───對封裝中的多次回流等工藝難點提出了解決方案.

Suitable for flow and reflow soldering.───適合一般焊接及回焊.

Development of advanced electronic package devices promoted the study on the reflow soldering.───先進電子封裝器件的出現推動了再流焊方法和設備的研究.

英語使用場景

In surface mounting technology(SMT), soldered joint data information is the basis of process automation in partial reflow soldering .

Delamination caused by electrical - over - stress ( EOS ) and moisture expansion during reflow soldering have shown different delamination patterns.

Furthermore, the soldering process of PCBA in the whole infrared reflow soldering stove is modeled by the finite element software, ANSYS, and is simulated by the three-dimensional modelling.

HOT BARThe hot wire is widely used in welding, solder reflow soldering.

In SMT reflow soldering process, profiling a PCBA is a extremely important step.

Design the stencil as common as possible when designing insert reflow soldering stencil, in order to brief technological process and meet better print effect.