curvature radius的意思

curvature radius中文翻譯：

曲率半徑

相似詞語短語

curvature of fields───象場彎曲

culture medium───[細胞][微]培養基（培養微生物的養料）

culture mediums───[細胞][微]培養基（培養微生物的養料）

curvatures───n.彎曲，[數]曲率

pirate radios───海盜收音機

curvature of field───象場彎曲

curvature of spaces───空間曲率

car radios───汽車收音機，汽車音響

circumradius───n.[數]外接圓半徑

雙語使用場景

influence of temperature, curvature radius of lens and the thickness of oil on ultrasonic field is analyzed.───并分析了溫度、透鏡曲率半徑和油層厚度對探頭聲場的影響。

Reducing the number of bends and adopting large curvature radius bends.───減少彎頭數量和采用大曲率半徑彎頭；

curvature radius was derivated and the contact stress of the three-arc-sect isometric type surface was calculated through the elastic dynamics theory.───應用彈性力學理論，推導出接觸點的曲率半徑，對三弧段等距型面聯接進行接觸應力計算。

When curvature radius is larger the results for rectangular and cylindrical coordinate are the same.───當曲面曲率半徑較大時,用柱坐標與直角坐標計算差別很小.

Tree initiation voltage and electrical tree shape of different curvature radius of needle tip were measured.───采用針板電極結構,測量了不同針尖曲率半徑的起樹電壓和電樹枝形態.

英語使用場景

Attention should be paid to the average curvature radius and that of the mirror face edge zone, when measuring the distorsion.

A series of factor such as the difference about the centre of figure and the shear centre, curvature radius, central angle is discussed.

An investigation has been made of the, movement in curvature radius of laminated bends by means of a radio-frequency heating process.

In higher pair plane transmission, it is important to determine the curvature radius of the member.

It is remarkable that setup of cross beam, length of curvature radius and eccentric distance of bearing affect internal force and deformation in curved girder bridge .

The line width of nanostructures is influenced by many factors such as tip curvature radius, detained time in the base surface, scanning speed, humidity, surface roughness etc.

In fact, it is difficult to obtain zero curvature radius at the tip of crack because of narrow ligamentum .

Researched friction loss and ultimate strength of external prestressing tendon considering deviator curvature radius and bending angle of prestressing tendon.

We have made certain that the reason of the splined spindle rapture is fatigue failure, its crack initiation lies in the minimal knuckle curvature radius surface region of the spline dedendum bottom.