cylinder head的意思

[機]氣缸蓋

cylinder heads───氣缸蓋

cylinder seal───圓柱形印章；滾筒印章

cylinder seals───圓柱形印章；滾筒印章

cylinders seal───圓柱形印章；滾筒印章

cylinder saw───圓筒鋸

cylindered───n.圓筒；汽缸；[數]柱面；圓柱狀物

cylindered seal───圓柱形印章；滾筒印章

Place the engine cylinder head over the dowels.───將引擎汽缸頭放在銷上.

cylinder head is heavily finned for strength.───汽缸頭附有許多突片以增加強度。

This is achieved by using cylinder head gasket.───這通過使用氣缸蓋襯墊實現.

The cast production technology and its control means of Cumins 6 BT cylinder head production are described.───敘述了康明斯6BT氣缸蓋鑄造生產工藝及控制手段.

The basic casting method - design principle of cylinder head was introduced.───介紹灰鑄鐵缸蓋鑄造工藝的基本設計原則.

The conclusions are of benefit to the improvement of the diesel engine with integrated cylinder head.───得出的結論有益于對整體式氣缸蓋柴油機的改進設計.

There is no EGR passage in cylinder head.───有沒有缸蓋廢氣再循環通道。

A process of cylinder - head structure optimum is described in this paper.───介紹了氣缸蓋的結構優化過程.

Clean the exhaust manifold and cylinder head mating surfaces.───清潔排氣歧管和汽缸頭配合面.

The most common cylinder head types are the hemi, wedge, and semi - hemi.───最常見的氣缸蓋類型是半球形, 楔形和準半球形.

It is often located at the cylinder head near the radiator lapse, depending on the car make.───它通常是位于汽缸頭靠近散熱器的墮落，根據汽車制造。

The powder cylinder head good case of impurities. 3.───奪目把粉缸關好,以防雜質出去.

The features of cylinder block and cylinder head core assembly vertical casting process are introduced.───介紹了缸體、缸蓋組芯立澆工藝的特點.

The cylinder head is heavily finned for strength.───汽缸頭附有許多突片以增加強度.

Remove control cables from cylinder head cover clip.───從汽缸頭蓋扣夾上移去控制拉索.

The main defect of type YC 4112 Q cylinder head is blowhole.───氣孔為YC4112Q氣缸蓋的主要缺陷.

The cylinder head is attached to the block with high - tensile steel studs.───氣缸蓋與氣缸體用高強度的鋼螺栓縛連結.

A new lateral casting process was introduced to produce YC 6 M cylinder head.───介紹了生產YC6M缸蓋的側澆鑄造新工藝.

The cylinder head is heavily finned for strength.

Remove control cables from cylinder head cover clip.

The cylinder head gasket is made of solid steel.

Place the engine cylinder head over the dowels.

The powder cylinder head good case of impurities. 3.

Clean the exhaust manifold and cylinder head mating surfaces.

The engine block and alloy cylinder head is shared with the 1.4-litre Energy engine so the bore is identical.

The cylinder head has been carefully machined to increase air-flow.

This is achieved by using cylinder head gasket.