青年中文surface roughness的意思
surface roughness中文翻譯：
表面粗（糙）度，表面光潔度
[機][氣象]表面粗糙度；表面光潔度
相似詞語短語
surface condensers───表面冷凝器
surface noises───表面噪聲
surface runoff───[水文]地表徑流；地面逕流
surface workers───地面工人
fracture toughness───[力]斷裂韌性
facetiousness───n.滑稽；玩笑
orange roughies───橙色粗飼料
雙語使用場景
Surface roughness codes and their labeling.───表面粗糙度的代號及其標注。
Understand the basic conception of form position tolerance and surface roughness.───了解形差與表面粗糙度基本概念.
This model provides technical support for surface roughness prediction model in virtual NC milling.───該模型為虛擬數控銑削表面粗糙度預測的建模提供了理論依據.
The surface roughness increases first and then decreases as surface density increase.───表面粗糙度在兩個系統中都是隨著表面密度先升后降.
Although cut tobacco, but look darker color, surface roughness.───煙絲雖顯得黃光, 但色澤較黑 、 黑不天粗劣.
Understand the basic conception of form and position tolerance and surface roughness.───了解形位公差與表面粗糙度基本概念.
It was also found the surface roughness in gas is better that in emulsion.───同時發現,在相同加工條件下,氣中加工的粗糙度普遍優于液中加工.
Therefore, surface roughness measuring technique takes a very important place in engineering and technological research.───因此, 表面粗糙度測量技術在工程技術研究中占有非常重要的地位.
At the beginning of machining, the metal is removed rapidly and the surface roughness descends quickly.───試驗還表明在加工初期具有較高的金屬去除率,表面粗糙度也下降較快.
The surface roughness Rz of 0.07 um can be obtained for the stainless steel spheres.───加工不銹鋼球面時,可獲得R_0.07μ的粗糙度.
Annual variation of surface roughness obtained from wind profile measurements.───根據風廓線測量獲得的地面粗糙度的年度變化.
Friction increases with increasing fiber surface roughness in the boundary and semiboundary.───在邊界和半邊界區內,摩擦隨纖維表面粗糙度的增加而增加.
The contribution of the guide surface roughness overshadows that of the fiber surface roughness.───導紗桿表面粗糙度的作用超過纖維表面的粗糙度.
Variations in surface roughness of both guide and fiber surfaces have a marked effect on friction.───導紗器和纖維表面粗糙度的變動,對摩擦力都有顯著影響.
Effects of different preparation procedures on abutment surface roughness.───不同預備程序對基牙表面粗糙度的影響。
Only in surface roughness of the finishing time is important.───表面粗糙度只有在精加工的時候才是重要。
For a good bond, an adhesive must counteract the effect of surface roughness and boundary layers.───為了取得很好的粘結, 粘結劑必須能克服表面粗糙和邊界層的反應.
Results show that this process can reach surface roughness with angstrom dimension.───結果表明,這種拋光工藝能獲得原子級的超光滑表面.
英語使用場景
The results demonstrate that when surface roughness increases, the load capacity and the frictional force of surface asperities increase, but the oil film-thickness ratio decreases.
The effects of polarization, surface roughness and physical temperature on surface apparent temperature are investigated.
The contribution of the guide surface roughness overshadows that of the fiber surface roughness.
The surface roughness increases first and then decreases as surface density increase.
Both dimensional accuracy and surface roughness of the metal handicraft in ceramic mold meet technological requirement.
Methods The surface roughness of 24 teeth treated with air-flow was observed under light wave interference microscope. Then the effect of prophylaxis paste on these surface were analyzed.
A - time surface roughness measurement system using fibre optics in process is in this paper.
Changes in surface roughness after gas cluster ion bombardments have been measured by an atomic force microscope.
Surface roughness is one of the significant machining characteristics in the finish cut of WEDM.