coating thickness的意思
coating thickness中文翻譯:
[電] 涂膜厚度
相似詞語短語
morning sickness───孕婦晨吐;孕婦懷孕初期的反應
sweating sickness───流行性粟粒疹熱;汗熱病
falling sickness───n.癲癇;(家畜的)癲癇發作
film thickness───(油)[物化]膜厚度
motion sickness───[醫]暈動病(指暈船、暈車、暈飛機)
sweating sicknesses───出汗病
morning sicknesses───孕婦晨吐;孕婦懷孕初期的反應
boating lakes───劃船湖
boating trips───乘船旅行
雙語使用場景
On the viscosity on coating thickness has a great impact, on a low viscosity, overlay thin.───上光油的黏度對涂層厚度有著較大的影響, 上光油的黏度低, 涂布層薄.
At the same temperature, the dipping time is longer, the greater the coating thickness.───在同一溫度下,浸鍍時間越長,鍍層越厚。
Spraying equipment along with roller axial movement speed determines the roller surface coating thickness.───噴涂裝置沿輥筒軸向移動的速度決定了輥筒表面獲得的涂布厚度.
Coating thickness measurement control depends on the speed of the gap and roller.───涂層厚度的控制就取決于計量輥的間隙和輥筒的轉速等因素.
Results show that thermal fatigue behavior is associated with circle temperature and coating thickness.───結果表明,復合涂層的熱疲勞行為與熱循環上限溫度、涂層厚度有關.
Wet film thickness gauges may be used during coating to ensure correct coating thickness.───在涂敷時應采用濕膜測厚儀以確定準確的涂層厚度。
The influence of the coating thickness on the waveform is analyzed.───該方法為透明薄膜/基底系統的定量檢測和無損評價提供了理論依據.
Books and periodicals on the cohesion and effectiveness of resin content, gummed coating thickness and grooving.───書刊的黏結效果與上膠量 、 背膠的涂布厚度及開槽大小有關.
lead fatigue strength is decreased linearly with the increase in nickel coating thickness.───鎳層的引線隨厚度的增加,抗疲勞強度呈直線下降。
Some poor quality aluminum plates to hide version based on the photoptic rubber coating thickness.───有些劣質版材為了包藏鋁版底基上的砂綱,不兵感平膠膜層的厚度增不小.
The back of the coating thickness according to need.───不面后涂層的厚度可根據需給.
The mathematics model that showed photoresist spin coating thickness evolvement on spherical surface was put forward.───提出了球面旋涂微米級厚度光刻膠膜層薄化率公式及徑向位置演變公式,并得到了膜厚分布的演變公式.
英語使用場景
The influence of the coating thickness on the waveform is analyzed.
The mathematics model that showed photoresist spin coating thickness evolvement on spherical surface was put forward.
The back of the coating thickness according to need.
Surface layer numbers coating thickness, surfacecoating and substrate Composition test respectively etc.
Coating thickness measurement control depends on the speed of the gap and roller.
The effects of current density, bath temperature and coating thickness on the solderability and wetting balance of Pd coating electroplated on phosphor-bronze were studied.
On the viscosity on coating thickness has a great impact, on a low viscosity, overlay thin.
Measurement of coating thickness in the proof-test of IC packages and metal cases using X-Ray Fluorescence (XRF) spectrometry is described.
Key points in screen stenciling are advanced, including coating thickness, developing time and after treatment, matters needing attention in practice are put forward.