青年中文adhesive strength的意思
adhesive strength中文翻譯：
粘合強度
相似詞語短語
defensive strength───防御力
tensile strength───[力]抗張強度
collective strength───集體力量
improve strength───提高力量
muscle strength───肌肉強度
shear strength───切變強度
tensile strengths───[力]抗張強度
magnetic pole strength───磁極強度
adhesive bandage───膠布繃帶
雙語使用場景
The viscosity, bulk and adhesive strength were tested.───測試了膠粘劑的本體強度、粘接強度和粘度。
Soles with a special adhesive strength of the joint and it certainly will not unglued!───鞋底是用特制的強力膠粘合的,保證不會脫膠!
effect of polyvinyl acetals on its adhesive strength was investigated.───探討了聚乙烯醇縮醛的粘接強度的影響。
Adhesive strength, hardness and the thermal shock resistance of spraying coating were tested.───測試了噴涂層的結合強度 、 硬度以及抗熱震性能.
Because the adhesive strength, viscosity, cohesive, and so we can decide the book bond stretch.───因為膠粘劑的強度 、 粘度 、 粘性等才能決定書冊粘結的牢度.
We use of varnish the sign up to standard, the adhesive strength is excellent, chatoyant brightness.───我們使用的油漆符合標準, 附著力優異, 光澤明亮.
Experiments results indicated this adhesive has better resistance to high temperature, flameproofing and adhesive strength.───實驗表明,該膠粘劑具有較好的韌性、耐溫性 、 阻燃性和較高的粘結強度.
In it's raw state, LS has very little adhesive strength.───在它的原始狀態, 液體軟陶有一定的粘結強度.
The tile water adsorption also affect on the adhesive strength clearly.───瓷磚的吸水率對粘結強度也有明顯的影響.
Minimum adhesive strength build up ensures easy peeling without adhesive migration and delamination.───低逐加粘合度可確保易于剝離而不會產生溢膠和分離.
They show excellent mechanic properties, with high adhesive strength andtheir thermal shocking resistance is also good.───結果表明:兩系列的涂層組織致密, 結合強度較高,抗熱震性能良好,顯示出良好的綜合力學性能.
The adhesive strength of the acid film was stronger than that of the alkali film.───堿性鍍層的結合強度優越于酸性鍍層.
Extender - dependent adhesive strength of the emulsion were also investigated.───還討論了擴鏈劑對其粘結強度的影響.
The powder types and the spray parameters have significant influence adhesive strength of the coating substrate.───粉末種類與噴涂條件對涂層的結合強度有明顯的影響.
The P ( VAc - MMA - AA ) emulsion shows apparent improvement in freezing resistance, adhesive strength as well as water - resistance.───結果表明,所得改性P ( VAc -MM A - AA ) 共混乳液的耐水性、耐熱性 、 耐寒性及粘結強度較PV Ac均聚物乳液均有明顯改善.
英語使用場景
The factors which influenced adhesive strength, curing speed of reactive polyurethane hot melt adhesive were studied.
In order that thermal sprayed coats are made to have higher adhesive strength, commonly a thin layer of bonding is precoated, then the functional layer is sprayed again.
We use of varnish the sign up to standard, the adhesive strength is excellent, chatoyant brightness.
The results showed that the influence of UV light on adhesive property was great, and protection can slow the deterioration of adhesive strength of CFRP and concrete.
Minimum adhesive strength build up ensures easy peeling without adhesive migration and delamination.
The influence of dual factor combination on adhesive strength was studied by dimension decreasing standard analysis.
Interdiffusion of the elements existed at the interface of the laminated YF 1 and steel A3 with a high adhesive strength.
When metal substrate and the coating are heated or cooled there would cause remanent stress to weaken the adhesive strength between them on account of their various expansion coefficients.
It is obtained from test that the Rare - earth additives can improve the adhesive strength, decrease porosity, make porousness smaller, therefor, raise the properties of the arc spraying coatings.