abrasive wear的意思

abrasive wear中文翻譯：

磨料磨損; 磨蝕

[機]磨損；[機]磨料磨損；磨蝕

相似詞語短語

a；asiveness───n.研磨；磨蝕；[機]磨損性

active wear───休閑服；運動服

a；asive───adj.粗糙的；有研磨作用的；傷人感情的；（聲音）刺耳的，難聽的；n.研磨料

a；asively───adv.研磨地；磨蝕地；粗暴地

a；asives───n.研磨劑；磨蝕材料；磨蝕巖屑（a；asive的復數）

activewear───n.運動服（等于activewear）

native bear───考拉

；asier───n.火盆；烘籃；黃銅匠

；idal wear───新娘裝

雙語使用場景

Its main wear mechanisms are plastic smearing, abrasive wear and fatigue spalling.───其磨損機理主要有塑性涂抹 、 磨粒磨損和疲勞剝落.

The main wear mechanisms are oxidation wear, adhesive wear, and abrasive wear.───主要磨損機制為氧化磨損 、 粘著磨損和磨粒磨損.

The main wear mechanisms of the coating are abrasive wear and delamination wear.───涂層的磨損機制主要是磨粒磨損和剝層磨損.

Abrasive wear may be defined as damage to a surface by a harder material.───磨粒磨損可定義為較硬的材料以一個表面的破壞。

The old lubricant should, therefore be cleaned off periodically to prevent abrasive wear.───為防止齒輪遭受磨損起見,應定期將舊復合劑加以清除.

The wear mechanisms of 45 are mainly abrasive wear and adhesive wear.───磨損機理主要為磨粒磨損和粘著磨損.

It has been shown that fatigue spalling is the main wear mechanism, abrasive wear also exist.───結果表明,滲層磨損機制以疲勞剝落為主, 兼有磨粒磨損.

The resilient wide seating surface provides tight shutoff, minimizing abrasive wear.───彈性寬廣的閥座密封表面能夠實現緊密密封, 最大限度減少研磨磨損.

Impact abrasive wear is one of the worst conditions on abrasion.───沖擊磨料磨損是一種極惡劣的磨損工況。

In the same time, abrasive wear is the major failure reason in mining machines.───在礦山機械中,磨粒磨損(它包括沖蝕磨損 、 磨料磨損和微動磨損)是其磨損失效的主要原因.

英語使用場景

Abrasive wear of cermet coatings of chromium carbide formed by SHS technology is controlled by both a micro cutting procedure and a micro tearing one.

The micro-scale abrasive wear behaviors of TAMZ alloy were studied using a TE66 micro-scale abrasion tester.

Bainite has higher abrasive wear resistance than tempered martensite with equal or higher hardness in hard abrasion, but in reverse in soft abrasion.

The reason for abrasive wear resistance enhancement of bionics smooth surface made by Laser Carving Technology is grain super-refining strengthening, hardening, effect of dowel pin and bionics.

The effect of varying mates on abrasive wear character of martensitic wear-resistant steel by MLD-10 type impact abrasion tester was investigated.

In the same time, abrasive wear is the major failure reason in mining machines.

Crankshaft, piston, plunger piston, guider, guide rail, rotary drum, slide block, and various abrasive wear surface.

The abrasive wear behavior and mechanism of an enamel coating were investigated with a rotary disk type abrasive wear machine.

Abrasive wear may be defined as damage to a surface by a harder material.