ejector pin的意思

ejector pin中文翻譯：

出坯桿; 起模桿; 推出機桿; 推頂桿

出坯桿，起模桿；推頂桿，推釘

相似詞語短語

detector van───探測車

ejector seat───彈射座椅

center pin───中心軸；[機]中心銷

ejector───n.[機]噴射器；驅逐者；推出器；排出器

ejectors───n.[機]噴射器；推出器；驅逐者（ejector的復數）

electorship───n.選舉人，選舉團成員

factor in───…的因素；將…納入；包括，把…計算在內

detector vans───探測車

ejector seats───彈射座椅

雙語使用場景

Suitable sizes of push-back pins may be selected from a standard ejector pin range.───回程桿的合適尺寸可以在標準的頂桿范圍內選擇。

direction of movement of this ejector pin is, therefore, controlled by this hole.───因此頂桿的運動方向由這個孔來控制。

Each ejector pin diameter has a number of different lengths associated with it.───每一種頂桿直徑有許多不同長度。

Does this an ejector pin or an ejector bar? Can we add an ejector blade?───請問產品這個面可否加頂針或頂塊? 產品允許加扁頂針嗎 ?

Does this part need an ejector pin or bar ? Can we add an ejector blade?───這個產品的柱位我們打算做司筒. (或鑲針)可以嗎 ?

The runner system was ejected by deviating hole and spherical ejector pin automatically.───澆注系統凝料的脫出采用了斜拉孔、球形拉料桿自動脫料機構.

Design of vent system includes vent groove, vent plug and clearance of ejector pin.───介紹了熱芯盒模具分型面排氣槽、排氣塞以及推桿間隙排氣等排氣系統設計方法.

英語使用場景

Does this part need an ejector pin or bar ? Can we add an ejector blade?

Note that die length of ejector pin contact with the mould plate is kept to a minimum by incorporating a clearance diameter hole in the mould plate.

Does this an ejector pin or an ejector bar? Can we add an ejector blade?

At present, the phenomenon of axial desquamation for an individual ejector pin plate or an annular cutter can occurs in a disposable digestive tract anastomat component.

Since some components such as ejector pin, locating ring , sprue bush , water junctions and springs are not included in the mould base, these components are purchased independently.

Each ejector pin diameter has a number of different lengths associated with it.

The direction of movement of this ejector pin is, therefore, controlled by this hole.

The plain diameter ejector pin may be used in one of two ways.

An ejector pin (4) is provided immediately below the peg, in addition to the normal ejector system, which in this example is also by means of ejector pins (5).