shear loading的意思

shear loading中文翻譯：

剪切載荷

相似詞語短語

shear───n.切變；v.剪（羊或其他動物的）毛；剪（頭發）；（受剪切力作用而）斷裂；n.(Shear)（美）希爾（人名）

loading───v.裝載，裝填，擔負（load的ing形式）；裝入；n.裝載；裝貨；裝載的貨

loading sign───裝貨標志

loading area───裝入區，負荷區，碼頭裝卸區；[計]負載區；[計]輸入區；裝料區

shear stress───[力]剪應力；[力]剪切應力；剪應力; 切變應力; 切應力; 粘性摩擦應力

shear reduction───剪切減縮

pruning shear───修枝剪

shear zone───剪切區域；[地質]剪碎帶

loading screen───加載屏幕

雙語使用場景

Theoretical study shows that the crack extension under shear loading is caused by tensile stress, and it does not belong to shear fracture.───理論分析證明，在剪切載荷作用下裂紋擴展是由于拉伸應力引起的，并非剪切破壞。

Compared with confined clay brick wall, equivalent viscous damping coefficients is improved by 37 percent and shear loading capability by 25 percent.───與約束燒結粘土磚墻相比，等效粘滯阻尼系數提高37%，受剪承載力提高25%。

tests and numerical models of rock interfaces and joints under cyclic shear loading are reviewed, and a new constitutive model is developed.───回顧巖體結構面切向循環加載的力學試驗和數值模型，并建立新的本構模型。

The study results show that the pore pressure and axial strain took on a fluctuant increasing process under cyclic shear loading.───研究表明，在循環荷載作用下，孔隙水壓力和軸向應變均是一個波動上升的過程。

Mechanical Properties and Damage Process of a Three-dimensional Woven Ceramic Composite under In-plane Shear Loading───三維機織陶瓷基復合材料的面內剪切性能及損傷研究

Experimental study on shear response of alumina under combined compression and shear loading───壓剪復合沖擊下氧化鋁陶瓷的剪切響應實驗研究

The Effective Properties of Fiber-Bundle Reinforced Composites Under Shear Loading───纖維束復合材料在剪力作用下的力學性能

Designing and Manufacturing of Compressive-Shear Loading Device───壓剪加載裝置的設計與研制

英語使用場景

In the experiments, a small-amplitude sine wave of displacement is modulated to shear loading to study the effects of shear stress perturbation on stick-slip instability.

Compared with confined clay brick wall, equivalent viscous damping coefficients is improved by 37 percent and shear loading capability by 25 percent.

As a crystalline substance, calcium phosphate is known to be prone to failure in shear loading.

Coincidence between the orientation of normal contact force anisotropy and the direction of the major principal stress has been observed during all stages of shear loading.