shear plane的意思
shear plane中文翻譯:
[力]剪切面;剪斷面
shear───n.切變;v.剪(羊或其他動物的)毛;剪(頭發);(受剪切力作用而)斷裂;n.(Shear)(美)希爾(人名)
plane───vt.刨平;用刨子刨;掠過水面;n.飛機;平面;程度,水平;n.(Plane)人名;(塞、瑞典、法)普拉內;vi.刨;乘飛機旅行;翱翔;adj.平的;平面的
shear stress───[力]剪應力;[力]剪切應力;剪應力; 切變應力; 切應力; 粘性摩擦應力
shear reduction───剪切減縮
pruning shear───修枝剪
shear zone───剪切區域;[地質]剪碎帶
shear force───[力]剪力,剪切力
shear strength───切變強度
specified shear───規定剪力
striper force and clearance between punch and die plate with respect to shear plane and die stress were analyzed.───分析了不同壓邊力和凸凹模間隙對精沖斷面質量和模具應力的影響關系。
The results show that the frictions caused by the wall of shear box will influence the distributions of stresses in specimens and the normal pressure stresses on the shear plane.───結果表明,剪力盒壁摩擦力將會影響試驗土樣中的應力分布和剪切面上的正壓應力值。
The paper proposes a new method for calculating shear plane area based upon a new oblique cutting model with double edge.───根據新的斜角非自由切削模型,本文提出了新的剪切面積計算方法。
Sandpaper or friction block is pasted on horizontal guide frame, and straight friction with helm shear plane.───水平導向架上面有貼砂紙或摩擦塊,與頭盔剪切面直線摩擦。
The characteristics of strains on the maximum shear plane were analyzed under tension-torsion multiaxial fatigue loading.───針對拉扭多軸疲勞加載情況,分析最大剪切平面上的應變特性。
The author analyzed the mechanism of grain refining. The result shows that grain refining is related to shear plane and shear direction.───對等徑角擠壓過程的晶粒細化分析表明,晶粒細化效果與剪切面和剪切方向有關。
And the formula for angle of shear plane is modified by chip shortening coefficient.───并通過切屑變形系數來修正模型中的剪切角計算公式。
A New Exploration of the Shear Plane Angle's Theory with FEM───剪切角理論研究有限元新方法探索
Variation of striper force and clearance between punch and die plate with respect to shear plane and die stress were analyzed.
中文翻譯推薦
- shear pattern
- prime rib
- sales letter and inquiries
- render setting
- temperature indicator
- timebook
- timebox
- soapboxing
- prime ribs
- single station die
- soapflakes
- the heat is killing me
- single station analysis
- temperature inverse
- sales letters
- see the parade
- single status
- spindle speed is too slow
- prime ring
- prime rider
- spindle speed less command