青年中文青年中文

shear structure的意思

shear structure中文翻譯:

剪切構造,剪力構造,剪切結構

相似詞語短語

shear───n.切變;v.剪(羊或其他動物的)毛;剪(頭發);(受剪切力作用而)斷裂;n.(Shear)(美)希爾(人名)

shear stress───[力]剪應力;[力]剪切應力;剪應力; 切變應力; 切應力; 粘性摩擦應力

shear reduction───剪切減縮

pruning shear───修枝剪

structure───vt.組織;構成;建造;n.結構;構造;建筑物

shear zone───剪切區域;[地質]剪碎帶

shear force───[力]剪力,剪切力

shear strength───切變強度

specified shear───規定剪力

雙語使用場景

This article focused on discussing about optimization of frame-shear structure basing on displacement.───本文著重探討基于位移的框剪結構的優化設計。

The global optimal design for the control system of frame shear structure with tendon control devices installed on the structure is conducted for the control systems.───應用本文的方法對剪切模型框架結構上安裝的錨索控制器進行了控制器的總體優化設計。

master frame is characteristic of shear structure deformation and the master support features bending cantilever bar deformation.───總框架具有剪切結構的變形特征,總支撐則具有彎曲懸臂桿的變形特征。

The structural deformation of fault zone is mainly characterized by compressor-shear structure or shearing compressive structure.───斷裂帶構造變形以扭壓或壓扭構造為主要特征。

The kinematics analysis of shear structure mainly includes the running track, velocity and acceleration of flying shear cut edge.───剪切機構的運動學分析,主要包括飛剪剪刃的運行軌跡、速度以及加速度的計算。

The Two-Layer Frames at the Bottom-the Design for Anti-Seism of Shear-Structure Commercial Housing───底部兩層框--剪結構商住樓的抗震設計

Dynamic and Time-Historical Analysis of a Frame-Shear Structure Containing Fault Shear Walls───含斷層剪力墻的框-剪結構動力時程分析

Supervision Default and Countermeasure of Reinforcement Engineering for Building with Frame-Shear Structure───框剪結構樓房鋼筋工程的監理弱點及對策

In this paper, first of all we made a formula with math and geometry of the shear structure, shear principle and guide format;───本論文首先根據它的工作特點對其剪切機構做了介紹、對其滾動剪切的原理和導向型式進行了數學分析;

英語使用場景

The structure in the south of Gaizhoutan is interpreted by using shear structure association theory, thus found the shear anticline structure in this area.

The dynamics analysis of shear structure mainly includes the calculation of the maximum shear force, shear angle and shear power, which provides the basis for choosing motor.