青年中文temperature region的意思
temperature region中文翻譯：
溫度區域
temperature───n.溫度；體溫；氣溫；發燒
region───n.地區；范圍；部位
localities region───地區
apical region───[醫]心尖區
antebrachial region───前臂區
critical temperature───[物][電子]臨界溫度；n.臨界溫度
temperature outside───室外溫度
temperature rise───[電]溫升；溫度上升；溫度上升，溫升，升溫
disordered region───無序區
can automatically measure temperature distribution of thermal spots and looks for the maximum temperature region of a thermal spot.───可自動測量熱斑的溫度分布及尋找熱斑的最高溫度區域；
At the phase transition temperature region, the pyroelectric response changes its polarity with time, indicating the two phases coexistence.───在相變溫度范圍，發現熱釋電響應隨時間改變極性，表明晶體中兩相共存。
At high temperature region close to the transition point, by considering the higher-order effect, theoretical values are in accordance with the experimental ones, too.───在靠近相變點的高溫區，考慮高階效應的影響后，理論值與實驗值也有較好的符合。
The high-temperature region locates below the roof and the temperature gradient out of the combustion area is not obvious.───高溫區域靠近頂板，燃燒區域以外巖石內溫度梯度變化不明顯；
To ensure safe and reliable operation of the equipment, high-temperature region must be isolated from the outside world.───為保證設備安全可靠運行，必須把高溫區域與外界隔絕起來。
The results showed that low temperature region has a more great effect on drying process than high temperature region in muffle.───試驗結果顯示，在馬弗爐內低溫區干燥溫度對垃圾干燥過程的影響較大；
In low temperature region, it is necessary to add the quantum correction to the kinetic energy computation of phonon.───在低溫區時，需對能量輸運粒子的動能計算進行量子修正；
In separate runs, pure carbon black burned in the temperature region 780-900 K (see Figure 5).───在單獨運行時，純碳黑色焚燒溫度在780-900區域的K（見圖5）。
The high temperature region ahead of the stir pin is narrower than that behind.───結果表明：攪拌摩擦焊是一種固態焊接方法，而且攪拌頭前面的高溫區域要比后方窄；
At the aspect of image enhancement technique, this paper proposed the adaptive gray-scale extension and enhanced the higher temperature region, which is important to this system.
An experimental study on a two-stage G-M refrigerator operating in the liquid helium temperature region with the cold regenerator outside of the displacer has been studied.
In intermediate temperature region(523-873K), the mechanism is a weak thermally activated process as the plastic flow is neither sensitive to temperature nor to the strain rate.