thermal load的意思

thermal load中文翻譯：

[動力]熱負荷；[力]熱應力

相似詞語短語

load───vi.[力]加載；裝載；裝貨；vt.使擔負；裝填；n.負載，負荷；工作量；裝載量

thermal paste───熱膠

thermal energy───[能源]熱能；溫熱熱能法，熱能專業

thermal shock───溫度急增，[核]熱沖擊；熱沖擊，溫度急增

thermal trip───熱斷路裝置；熱敏斷路；熱脫扣器；熱[雙金屬]斷路裝置

thermal plant───熱電廠；[電]火電廠

thermal inertia───熱惰性，熱慣量，熱慣性；熱惰性；[熱]熱慣性（溫升速率的倒數）；[熱]熱慣量

thermal properties───熱性質；熱力性質；熱特性

thermal mugs───保溫杯

雙語使用場景

Then, its indicator diagram, mechanical load and thermal load are analyzed.───同時對示功圖、機械負荷和熱負荷進行了分析。

This paper describes a multiple controller for a boiler thermal load system.───介紹了一種用于鍋爐熱負荷系統的復合控制器。

influence of water temperature variation on thermal load on dam body.───水溫度變化對壩體溫度荷載的影響。

Thus, does the reduce protein growth under conditions of heat stress as a means of reducing the thermal load?───如此，在特定熱應激條件下減少蛋白合成意味著降低熱負荷？

Half of the thermal load of a super-insulated home is due to heat losses through ventilation.───高隔熱住宅的一半熱負荷都歸因于通風造成的熱量損失。

After testing the temperature of the cylinder and cylinder -head , we have achieved the goal of greatly improving the thermal load .───實測氣缸蓋，氣缸溫度場表明，達到了明顯改善風冷柴油機熱負荷的目的。

To adapt to the test of batch production, we established the thermal load automatic testing system.───為適應批量生產的測試要求，我們建立了熱負載自動測試系統。

According to thermal load characteristic of Chaoyang district, this paper puts forward the proper boiler installation scheme.───本文根據動力區朝陽地區熱負荷的特點，提出了適合其的裝爐方案。

Surface crack has little influence to temperature field. Crack tip forms high tensile stress under the thermal load. 5.───表面裂紋缺陷對制動盤溫度場的影響很小，裂紋尖端在熱載荷作用下形成較大的拉應力。

英語使用場景

The factors of influencing the thermal load and thermal stress at the peril point of hot forging die were analyzed.

Analyzed are factors affecting thermal load on air-cooled diesel engines and governing law of its variation and matching of thermal load with cooling system.

An experimental study has been conducted of the thermal load distribution in a tangentially fired boiler furnace with burners installed at the four corners of the boiler.

Adding the stillwater load, thermal load and wave-making load to the above extreme response, the extreme total load expected to occur in a certain number of wave encounters is evaluated.

This is achieved by using a unique multi beam technology, demonstrated in figure 2, which reduces the power density, minimizes the thermal load, and reduces the kerf width in the wafer.

The thermal load is the main reason which causes damage of hot forging die.

The fatigue crack under thermal load extension is analyzed in this paper.