青年中文shielded welding的意思
shielded welding中文翻譯：
藥皮電焊條焊接
shielded metal arc welding───自動保護金屬極電弧焊，熔化極自動保護電弧焊
shielded───adj.隔離的；屏蔽了的；防護的；鎧裝的
welding───v.焊接；（使）緊密結合，成整體；焊接（物件）；（通過熔化或軟化）連接（weld的現在分詞）；n.焊接，鍛接
mig welding───金屬惰性氣體電弧焊
shielded cable───[電]屏蔽電纜；屏蔽線
bevelling welding───坡口焊
shielded metal───屏蔽金屬
welding nut───焊接螺母；[機]焊裝螺孔塞
welding electrode───焊條；電焊條；[機]焊接電極；焊接電極，焊條，電焊條
Twin-wire indirect arc gas shielded welding is a new welding technology.───雙絲間接電弧氣體保護焊是一種新的焊接方法。
paper, design principle on gun of automatic CO2 gas shielded welding with thick electrode is discussed.───論述了粗絲co2自動焊焊槍的設計原理，并對氣流在焊炬中的流動情況和對熔池保護效果作了簡要介紹。
The twin-wire indirect arc gas-shielded welding is a new welding technology.───雙絲間接電弧氣體保護焊是一種新的焊接工藝。
Layer can be used to connect steel stamping forming diamond-shaped network, with gas shielded welding spot on the plate.───連接層可用沖壓成型的鋼質菱形網，用氣體保護焊接方法點焊于鋼板上。
The range of cleaning (width) shall not be less than 10mm for manual welding, not less than 20mm for gas shielded welding.───清理范圍（寬度）對于手工焊不小于10mm，氣體保護焊不小于20mm。
it also analyzes the causes and control methods for welding defects in semi-automatic gas shielded welding.───同時也分析了半自動保護焊焊接缺陷產生的原因和控制方法。
The results indicate that the welded joint microstructure obtained by CO2 gas shielded welding is uniform and small.───結果表明：CO2氣體保護焊接頭組織較均勻細小；
Skill in electric welding and gas shielded welding (as CO2 welding) and gas welding.───具備電焊，氣焊和氣體保護焊（如CO2焊接等）的技能。
Trial of STT Gas Shielded Welding Used in Transportation Pipeline───STT氣體保護焊用于長輸管道焊接的試驗
Twin-wire indirect arc gas shielded welding is a new welding technology.
Because of the difference of arc circuit, the welding process of twin-wire indirect arc gas shielded welding is more stable than single wire welding.
The range of cleaning (width) shall not be less than 10mm for manual welding, not less than 20mm for gas shielded welding.
It can provide several high performance welding modes, such as constant-voltage submerged arc welding, constant-current submerged arc welding, gas shielded welding and carbon arc air gouging.