spray drying的意思

spray drying中文翻譯：

[化工]噴霧干燥

相似詞語短語

drying───adj.干燥的；n.干燥；（木材的）風干；v.（使）變干，把……弄干；擦去淚水；擦餐具；（使）脫水；忘記臺詞（dry的現在分詞）

spray───n.（Spray）（英）斯普雷（人名）；n.噴霧，噴霧劑；噴霧器；水沫；（用作裝飾的）小樹枝，小花枝；vt.噴射；vi.噴

drying up───n.擦干（廚具、餐具等）；使…干涸；枯竭；擦干碗碟（dryup的現在分詞形式）

drying oven───[化工]干燥箱；干燥爐[箱]

drying temperature───干燥溫度

drying off───烘干，弄干

drying technology───干燥技術

drying agents───干燥劑

spray painting───v.噴漆( spray paint的現在分詞 )；[涂料]噴涂

雙語使用場景

Require inspection once every two weeks flipping once, if the sand and spray drying may be appropriate.───需要檢驗每兩周一次翻轉一次，如果沙子和噴霧干燥可能是適當的。

High viscosity paste should not use spray drying method, and the cost of this method is high, generally use.───高粘度糊液不宜使用噴霧干燥法，且這種制法成本較高，一般很少采用。

Applications include: Dust control, spray drying, humidification, odor control, product coating, product cooling, and gas cooling.───應用包括：塵埃控制、噴霧干燥、加濕、氣味控制、產品涂層、產品冷卻和氣體冷卻。

I really look forward to working with you, and this is a good opportunity for me to learn the spray drying process from you.───我期待著和你一塊并肩工作。這對我來說是一次學習噴霧干燥的好機會。

the prepared molybdenum powder is collected by a vibrating screen arranged at the discharge hole of a spray drying tower.───將制得的鉬粉通過噴霧干燥塔出料口振動篩進行收集。

Spray-drying is one of the swiftest and widest chemical engineering unit operations.───噴霧干燥是重要化工單元操作中發展最快、應用最廣泛的一種類型。

In spray drying, a droplet of slurry of CaOH is introduced from the top, and a dry product results, after its contact with flue gas .───在噴淋干燥法中，氫氧化鈣漿狀物的液滴從燃燒爐的頂部加入，與燃燒廢氣接觸后，變為干燥物。

The results of this study are useful for the design and operation of dry and spray-drying processes using hydrated lime.───本研究的結果有助于使用氫氧化鈣作為吸收劑的乾式與半乾式系統之設計與操作。

英語使用場景

Centrifugal spray drying seems to be the best drying way of FLAXSEED GUM.

The Spray drying up after water effect.

A spray drying process of preparation of diisporopyl malonate with super acid as catalyst was studied.

The centrifugal spray drying process of eeg albumen powder was studied.

A spray drying process of preparation of diisporopyl malonate with super acid as catalyst was studied. The yield and purity were above 90% and 96%, respectively.

The spray drying technology conditions for the aniseed oil microencapsulation was studied.

The reunion could be avoided by spray drying, but its energy consumption was higher than dry box and the submicron powders should be reclaimed.

In fact, Edwards' first exposure to the spray drying process occurred when he was working with a spray dryer to produce highly respirable drug aerosols in a food science lab.

The blaze gutted a spray drying area of the factory used for processing skimmed milk powder.