wire feeding的意思

wire feeding中文翻譯：

喂絲

喂線

相似詞語短語

feeding───n.飼養；吃；輸送；adj.供給飼料的；攝取食物的；v.飼養（feed的ing形式）

wire───vt.拍電報；給…裝電線；vi.打電報；n.(Wire)人名；(英)懷爾；n.電線；金屬絲；電報

feeding time───喂養時間；供料時間

feeding tube───[醫] 飼管

feeding ground───食物區；聚食場（鳥類、魚類或野生動物）

scaphopoda feeding───肩胛動物飼養

feeding america───養活美國

ctenophore feeding───草魚攝食

No feeding───禁止喂食

雙語使用場景

Adopting digital control technology controlled the wire feeding motor.───采用數字化控制技術對送絲電機進行控制。

The wire feeding system realized interface with the digital welding source.───送絲系統的數字化可實現與數字化焊接電源的接口。

Besides, the stability of the wire-feeding system influence the surface quality of processing work piece directly.───走絲系統的穩定性直接影響加工工件的表面質量。

The stability of arc voltage may be improved by H-bridge driving circuit used for wire feeding system.───這大大減小了電機的慣性，將其用于送絲系統將有望提高電弧電壓的穩定性。

The method may be applied satisfactorily to the determination of aluminium in ladle aluminium-calcium packed wire feeding.───方法可用于測定鋁鈣包芯線中鋁含量，結果令人滿意。

The system consists of guide wire feeding and detecting, force feed back, imaging and image processing etc.───此系統主要由導絲進給與檢測裝置、力反饋裝置、成像及圖像處理設備等組成。

Each of the coated wires may be controlled alone and the wire feeding channels are provided with compressed air.───每根包芯線可以單獨控制。在喂線通道通有壓縮空氣。

The experiments on desulphurization with Mg bearing cored wire feeding in ladle are carried out in this paper.───報道了鋼包喂含鎂包芯線脫硫工藝研究的結果。

英語使用場景

The present paper introduces the process route of LD converter Ar blowing and wire feeding slab continuous caster TMCP for producing Q345C low alloy and high strength structural steel plate.

Two PI adjusters were applied for wire feeding velocity control, one performed motor armature voltage feedback, the other one executed arc voltage feedback to determine the given velocity.

The pulsed voltage, oscillating wire feeding and short current are adjusted synchronously.

Usage: special equipment for auto starting motor armature flat wire coil automatic wire loading, automatic wire feeding, automatic alignment, automatic cutting off and automatic shape making.

Round wire feeding options, only under the wire diameter, and wire types irrelevant.

To guarantee good quality of butt laser welding with filler wire, a gap width detecting sensor and a wire feeding system has been designed.

Usage: special equipment for auto starting motor armature round coil automatic wire loading, automatic wire feeding, automatic alignment, automatic cutting off and automatic shape making.

The system consists of guide wire feeding and detecting, force feed back, imaging and image processing etc.

A pulsed - wire feeding machine for underwater welding has been developed.