strain hardening的意思

strain hardening中文翻譯：

機械（加工，應變）硬化

相似詞語短語

hardening───v.硬化；使強壯（harden的ing形式）；n.硬化；淬火；鍛煉

strain───n.(Strain)人名；(英)斯特蘭；n.張力；拉緊；負擔；扭傷；血緣；vi.拉緊；盡力；n.（植物、動物的）品種；種類；vt.拉緊；濫用；濾去；竭力

dispersion hardening───彌散硬化

hardening point───[機]硬化點

hag strain───和應變

hardening of───硬化

fearful strain───可怕的緊張

groin strain───腹股溝拉傷

precipitation hardening───[機]析出硬化；淀積硬化；淀積[脫溶]硬化

雙語使用場景

Due to the effect of strain hardening, higher amount of cold deformation resulted in superior room temperature strength and inferior torsion ductility.───由于加工硬化效應的影響，隨著冷拔變形量的增加，合金絲材的室溫強度增加，扭轉塑性下降。

The steel reinforcement is represented by a bilinear strain hardening model.───鋼筋以雙線性應變硬化模型表示。

The model includes the effect of strain rate sensitivity, strain softening and strain hardening.───該模型包括了應變率敏感性效應，應變軟化效應和應變硬化效應。

When it accumulated to a higher degree, the specimen began to shear and dilate after a short time of strain hardening.───達到一定程度后，巖石表現出短暫的應變硬化，巖石開始剪脹。

The results show that the stress-strain relationship of geotextile-reinforced fillings is of strain hardening.───試驗表明：加筋填料的應力–應變關系表現為應變硬化型；

The PP with high grafting rate can improve the melt strength and the extensional viscosity of a PP system and the strain hardening.───接枝率高的PP，可提高PP體系的熔體強度和拉伸黏度及其應變硬化。

Thirdly, plastic strain ratio and strain hardening index are the two key parameters of material's formability.───塑性應變比與應變硬化指數是評價板料成形性能的兩個重要參數。

The strain hardening rate of the material in various aging states is also increased by this addition, wh.───強化顆粒的加入還顯著提高了材料在各種時效狀態的加工硬化率。

Iron and steel - Method of determination of the tensile strain hardening exponent n of steel sheet and plate.───鋼鐵.鋼薄板和板材拉伸應力硬化指數n的測定方法

英語使用場景

When it accumulated to a higher degree, the specimen began to shear and dilate after a short time of strain hardening.

A material with plastic prestrain shows the property of strain hardening such as isotropic hardening, kinematic hardening or mixed hardening.

The load point displacement caused by single load for two dimentional cracked body with certain strain hardening exponent is divided into its linear-elastic and plastic components.

The yield conditions and calculation parameters of compressive strain hardening soils, and of dilative strain hardening soils are obtained through tests whose rationality is approved by the computed ...

They can only be strengthened by cold working ( also called strain hardening ).

The main factors such as pressure, the third invariant of stress tensor, strain hardening and softening, stain rate and tensile damage have been taken into account in the constitutive model.