calcination temperature的意思

calcination temperature中文翻譯：

煅燒溫度

相似詞語短語

calcination───n.煅燒；[化工]焙燒；燒礦法

temperature───n.溫度；體溫；氣溫；發燒

calcination kiln───煅燒窯

calcination bone───煅燒骨

calcination is───煅燒

calcination test───煅燒試驗

calcination unit───煅燒裝置

calcination define───煅燒定義

critical temperature───[物][電子]臨界溫度；n.臨界溫度

雙語使用場景

of calcination temperature, content of nickel and molybdenum on the selective hydrogenation performance of catalyst were investigated.───載體焙燒溫度、金屬鎳與鉬的負載量對催化劑選擇性加氫性能的影響。

The suitable process system, such as calcination temperature and calcination time etc. has been found out.───出合適的煅燒溫度、煅燒時間等工藝制度。

The flux dosage and calcination temperature, which affect luminosity of the fluorescent powder, are the major controlling factors.───激活劑用量和煅燒溫度影響熒光粉的發光亮度，是主要控制因素。

This study, through different calcination temperature and calcination time to elect the best of phosphorus adsorption swelling vermiculite.───本研究，通過不同的煅燒溫度和煅燒時間選出對磷吸附效果最好的膨脹蛭石。

A mild calcination temperature and a higher carbonation temperature favored the process and the maximal capture capability could be higher.───溫和的煅燒溫度和較高的吸收溫度下，吸收劑的最大轉化率比較高；

In a proper range, increasing the additive dosage and calcination temperature could improve the leaching rate of Au and Ag.───在適當范圍內增加添加劑的用量和提高焙燒溫度，均有助于金銀浸出率的提高；

The results showed that the amount of surface defects and the microstructure of photocatalyst changed with the calcination temperature.───結果表明，焙燒溫度能引起特定的缺陷數目變化，改變了光催化劑的微觀結構。

The results showed that concentration of the catalyst, calcination temperature had some influences on photo catalytic properties.───結果表明，催化劑的濃度和焙燒溫度對光催化性能有一定影響。

XRD and IR were used to analyze the effect of different calcination temperature on phase composition of the precursor.───采用XRD和IR分析不同灼燒溫度對前軀體物相組成的影響。

英語使用場景

The influence of the calcination temperature on the catalytic activity of zeolitefor the reaction of o-xylene isomerization was investig.

The influence of the calcination temperature on the catalytic activity of o - xylene isomerization was investig.

The influence of the calcination temperature on the catalytic activity of zeolitefor the reaction of o-xylene isomerization was investigated.

In this paper, the effects of calcination temperature, holding time and content of dolomite on the strength and expansion rate of cement mixed with calcined dolomite are investigated.

The maxim strength is found when calcination temperature is 600 ℃.

The lower calcination temperature compared with other methods can avoid growing and reuniting of powders temperature.

Of pore silica gel, calcination temperature should not exceed 200 ℃.

The pore volume and specific surface area of the samples decreased with the increasing calcination temperature.