coating layer的意思

coating layer中文翻譯：

[涂料]涂層

相似詞語短語

coating───v.給…穿上外衣；蓋上（coat的ing形式）；n.涂層；包衣；衣料

layer───vt.把…分層堆放；借助壓條法；生根繁殖；將（頭發）剪成不同層次；n.層，層次；膜；[植]壓條；放置者，計劃者；vi.形成或分成層次；[植]通過壓條法而生根

coating buffer───涂層緩沖液

coating thickness───[電] 涂膜厚度

conformal coating───保形[角]涂料；敷形涂料；保形涂層，保形涂敷

seed coating───[植]種皮

multi coating───n.多層鍍膜

erbia coating───erbia涂層

milky coating───乳白涂層

雙語使用場景

results) reveal that the coating layer of aluminum hydroxide is loose and porous.───結果表明，氫氧化鋁所形成的包覆層是疏松和多孔的。

The properties of coated paper are mostly depended on the coating layer structure.───涂布紙或紙板的涂布性能受涂層結構的特性影響較大。

Exothermic efficiency, metallographical structure and transition region of coating layer were also investigated.───還研究了放熱效應，金相組織與涂層過渡層。

It was found that there was no reaction between coating layer and aggregate through SEM studies on interfacial transition zone.───通過掃描電鏡觀察再生粗骨料的界面過渡區，發現涂漿層不與骨料本身反應。

For test specimens produced in a laboratory, the thickness of each paint coating layer must be recorded and indicated in the test report.───在試驗室內制作的測試樣品，每一片的厚度須記載并在測試報告中指明。

and a lead conductor coated with an insulating coating layer and a sealed vessel which are for use in this electrical part, etc.───以及密封容器和具有絕緣覆蓋層的導線導體，兩者都可以用在電氣部件等中。

Thus, one coating layer is formed on the surface of the touch control plate so as to obtain thin touch control plate with high strength.───因此，在觸控板的表面形成披覆層，從而實現其薄型化及高結合強度高的效果。

Through experimental comparison, the new process method can significantly improve the contact fatigue life of the coating layer.───通過實驗對比，這種新工藝方法可以顯著地提高涂層的接觸疲勞壽命。

The film has obvious redshift phenomenon and its euphotic rate reduces with the increases of the number of coating layer.───鍍膜層數增加，薄膜有明顯紅移現象并且透光率會降低。

英語使用場景

The coating layer of metal-organic compound consists of pulverulent metal, inorganic salt and organic compound liquid.

The mechanism of metal penetration defect of iron castings in EPC process has been analyzed, which arise from cracking of the coating layer.

The (results) reveal that the coating layer of aluminum hydroxide is loose and porous.

Mechanism of low gloss- producing, structure of coating layer, manufacture and development of matte and dull coated paper were described.

A coating layer can be prepared outside the pastille coating layer.

The homogeneity of the coating layer was characterized by SEM and EDX.

A continuous and uniform nickel coating layer has been obtained on thesurface of carbon fiber (CF) and flake graphite (FG) by electroless platingtechnique.

Compared with that of furan resin bonded sand, the feasibility of phenol resin bonded sand in forming a uniform coating layer in the inside mould surface is studied as well.

The strength of coating layer obtained by - shot - felt powder with subsonic oxygen - acetylene spraying technique was discussed.