collapse strength的意思

collapse strength中文翻譯：

[力]抗擠強度；破裂強度

相似詞語短語

collapse───n.崩潰；（突然）倒塌；病倒；（貨幣）暴跌；v.（突然）倒塌；（尤指因病重而）倒下，昏倒；（尤指工作勞累后）坐下；崩潰；（貨幣）貶值；折疊；（肺或血管）萎陷；套縮

strength───n.力量；力氣；兵力；長處

till collapse───直到崩潰

collapse all───全部折疊

shear strength───切變強度

collapse build───折疊生成

antedate collapse───早期崩塌

initialization collapse───初始化崩潰

sapped strength───磨損強度

雙語使用場景

With the improvement of the production and manufacture technology of casing, the actual collapse strength of casing cannot be accurately calculated by present API 5C3 formula.───隨著套管制造工藝水平的不斷提高和制造質量的顯著改進，現有的API 5C3公式已不能正確的預測套管實際抗擠抗內壓強度。

With finite element method, the collapse strength of casing with ovality and eccentricity under unidirectional uniform and ellipse distributive force was calculated and analyzed.───采用有限元法，計算和分析了壁厚不均與橢圓套管在單向均勻和單向橢圓分布外擠力作用下的強度問題。

improved model is used to calculate the final casing collapse strength. This method combines FEA and strain test together and thus can get more …───該方法將有限元計算與應變檢測結合起來，大大提高了有限元計算的精度，對預測套管的擠毀壓力、指導高抗擠套管的開發具有一定的參考價值。

The results showed that the casing collapse strength and internal pressure strength will decrease as the casing wear-thickness increases.───計算結果表明，非均勻磨損套管的抗擠強度和抗內壓強度降低百分比隨套管磨損厚度的增加而增加；

Under the same wear condition, the casing collapse strength decreases more rapidly than the internal pressure strength.───在相同的磨損厚度情況下，磨損后套管的抗擠強度比抗內壓強度降低得更快；

Discussion on the new design standard for tri-axial stress anti-collapse strength of casing string───關于套管柱三軸抗擠強度設計問題的討論

Effects of Non-uniform Loads on Collapse Strength of High-density Perforated Casing───非均勻載荷對高密射孔管抗擠強度的影響

Collapse Strength Analysis for Thick-wall Casing under Non-uniform Loads───非均勻載荷下厚壁套管抗擠強度分析

The Effect of Prefabricated-Hole Parameters on Casing Collapse Strength under Non-Uniform Loads───非均勻載荷下預制孔參數對抗擠強度的影響

英語使用場景

Based on this concept, the effect of cement mantle on the collapse strength of casing and the sensitivity of collapse strength to the parameter variation of cement mantle are calculated and analyzed.

Mechanical characteristic of CT is studied. The model of bending, internal pressure strength and external collapse strength, diametric growth and stuck-point of CT is established.

A new reliability analysis method for casing collapse strength was proposed as a high precision small sample method associating with degree of confidence and reliability designs.