concave die的意思

concave die中文翻譯：

凹模，凹模

相似詞語短語

concave───adj.凹的，凹面的；n.凹面；v.使變凹形

die die die───死吧，死吧

die die───模具

concave function───[數]凹函數

concave shape───[醫]凹形

concave polygon───n.[數]凹多邊形；n.凹多邊形

concave mirror───n.凹透鏡; 凹鏡

concavo-concave───adj.兩面凹的

concave upward───凹向上的；凹向上；[醫]凹面向上

雙語使用場景

numerical simulation of a six-tooth rectangle spline, the optimized half-angle of the concave die can be got.───矩形花鍵軸實際成形情況進行模擬計算，獲得了入模半錐角的較佳取值范圍。

Also introduced the measure of prevent the convex and concave die cracking in course of pressing.───了模具結構，同時也介紹了在沖壓過程中凸、凹模易開裂采取的措施和方法。

Finally, each optimized design parameter of the concave die structure had achieved, and obtained the anticipated result.───最后達到了凹模結構的各個參數的優化設計，得到了預期的結果。

By numerical simulation of a six-tooth rectangle spline, the optimized half-angle of the concave die can be got.───結合六齒矩形花鍵軸實際成形情況進行模擬計算，獲得了入模半錐角的較佳取值范圍。

and taking the concave die core out of the ceramic product after transforming from ice into water.───當原來的冰凹陷模芯變成水后從陶瓷制品中取出。

The position occupied by the concave die core originally becomes concave shape when changing into vacant ceramic product.───原來由凹陷模芯所占據的位置變成空位陶瓷器就成了凹陷形狀。

According to the characteristics of the part, proposed piercing process with concave die. Introduced die structure and working process.───根據該零件特點，提出了采用有凹模沖孔加工，并介紹了模具結構及工作過程。

Also introduced the measure of prevent the convex and concave die cracking in course of pressing.───優化了模具結構，同時也介紹了在沖壓過程中凸、凹模易開裂采取的措施和方法。

Study on Material Determination of Silicon Steel Sheet Cool Punching Concave Die and Compound Intensifying Processing───硅鋼片冷沖凹模的選材與復合強化處理研究

英語使用場景

The position occupied by the concave die core originally becomes concave shape when changing into vacant ceramic product.

The effect of influencing the plastic instability is reduction of area, concave die half angle, lubricates and frictional factor etc. And it submits the reasonable range by the calculation graph.

The influence of raised altitude of concave die and rivet material on riveted joint performance was analyzed by means of riveted joint section shape and displacement-load curve.

There are a float mould core and a float concave die in the die, forging forming within a closed ring cavity formed by two dies.

Through theoretical analysis, probability revisal and experimental test, the limit drawing ratio of a tapered cup drawn by cylinder convex punch and tapered concave die is determined in tis paper.

The results show that increasing raised altitude of concave die can enhance self-locking performance of riveted joint in...

The forming process of a warm extrusion concave die about the drilling bit shell was simulated numerically with contact analysis modules in ANSYS.

By numerical simulation of a six-tooth rectangle spline, the optimized half-angle of the concave die can be got.