cooling rate的意思

cooling rate中文翻譯：

冷卻速度；冷卻速率；散熱速率

相似詞語短語

cooling───adj.涼快的，涼爽的；冷卻的；n.(Cooling)（英、美）庫林（人名）；n.冷卻，降溫

heart cooling───心臟降溫

cooling medium───[制冷]冷卻介質；冷媒

cooling towel───冷卻毛巾

rate───n.(Rate)人名；(法、塞)拉特；n.比率，率；速度；價格；等級；vi.責罵；被評價；vt.認為；估價；責罵

cooling agent───[制冷]冷卻劑

cooling curve───[晶體]冷卻曲線；步冷曲線

cooling systems───冷卻系統

cooling pillow───降溫枕

雙語使用場景

The cooling rate and denudation rate decreased overall from north to south.───總體上自北而南，剝蝕速率和冷卻速率均逐漸變小。

Finally, I tested the parsing by checking to see if the object contained a cooling rate multiplier.───最后，通過檢查此對象是否包含冷卻率乘數測試解析過程。

The glass transition temperature of PLLA decreased with the increase of cooling rate.───玻璃化溫度和結晶度隨著降溫速率的降低而增大。

In cumulus convection ascent rates of several metres a second give a cooling rate of a few degrees per minute .───在積云中，每秒幾米的對流上升速度造成的冷卻速率為每分鐘幾度。

Fuzzy optimization was applied to obtain the cooling rate and fermentation time of the batch beer fermentation process.───本研究應用模糊最適化求得批次啤酒發酵程序之冷卻水流率與發酵時間。

controlling cooling rate can be realized by controlling the initial temperature, bellows-strip spacing and jet rate of the cooling gas.───控制冷卻速度可以通過控制帶鋼初始溫度、帶鋼與風箱間距和冷卻氣體噴出速度等參數來實現。

The temperature distribution field and its variation rule was being simulated by controlling environmental temperature and cooling rate.───通過控制環境溫度和冷卻速度，模擬厚大斷面球墨鑄件凝固過程溫度場的分布和變化規律。

Increasing cooling rate is useful for spreading the non-equilibrium microstructure around the primary grains.───結果表明：增加冷卻速率有利于初始凝固組織中存在的非平衡組織的分散細化。

英語使用場景

Slow cooling rate as furnace cooling can increase the values of hardness.

General anneal cooling rate slowest, fire rate quicker, the quenching cooling rate is quicker.

Simulating different solidification cooling rate with step-metal mould and sand mould, the effect of solidification cooling rate on microstructure and properties of high boron steel were studied.

That huge cooling rate shows that Cooper pairs are forming, says Dany Page, a theoretical astrophysicist at the National Autonomous University of Mexico in Mexico City.

At a slow cooling rate, the size of spherulite becomes larger and more regular.

The cooling rate and denudation rate decreased overall from north to south.

The more the increasing of cooling rate or pre-deformation, the more the secondary dendrite arms are easy to coarsen.

The more the increase of cooling rate or pre-deformation, the more the secondary dendrite arms are easy to coarsen.

Effects of cooling rate on eutectic microstructure of Zn - ( 0.24 Ni ) alloy for hot dip galvanization were investigated.