corrosion rate的意思

corrosion rate中文翻譯：

[化學]腐蝕速率

相似詞語短語

corrosion───n.腐蝕；腐蝕產生的物質；衰敗

corrosion science───[化學]腐蝕科學

corrosion protection───[材]防腐；防腐蝕，腐蝕保護

neutralize corrosion───中和腐蝕

bisulfide corrosion───二硫化氫腐蝕

rate───n.(Rate)人名；(法、塞)拉特；n.比率，率；速度；價格；等級；vi.責罵；被評價；vt.認為；估價；責罵

fretting corrosion───摩擦磨蝕；接觸腐蝕；接觸腐蝕，摩擦腐蝕; 磨蝕

corrosion suede───防腐麂皮

corrosion resistant───耐腐蝕的，抗腐蝕

雙語使用場景

example of swimming pool wall the conditions for performing corrosion rate measurements were not ideal.───案例里的游泳池池壁的腐蝕速率測試環境不理想。

The results show that the corrosion rate gradually reduces with the increase of experimental time.───研究結果表明，隨著試驗時間的延長，腐蝕速率逐漸降低。

Conversion of a metal surface to a less reactive state. A process to reduce corrosion rate of metal surfaces.───一種可以降低金屬表面活性的轉化膜，能夠降低金屬表面腐蝕幾率的工藝。

Corrosion rate of aluminum alloy half-immersed in electrolyte with time was similar with that of sample immersed entirely in electrolyte.───鋁合金半浸于電解液中的腐蝕速率隨時間的變化趨勢與全浸于溶液中相似。

The results revealed that the corrosion rate of steel being used for pharmaceutical machine had been reduced in a very big degree.───結果表明：制藥機械用鋼材的腐蝕率大大降低。

Due to this fact it was possible to conduct the corrosion rate measurements by means of GalvaPulse equipment.───基于這樣的事實，使用GalvaPulse測試腐蝕速率是可行的。

At low and moderate temperatures, corrosion product films might be destroyed by liquid flow, inducing high corrosion rate.───在中低溫區形成的腐蝕產物膜容易被流體破壞，導致了高的腐蝕速率。

At the same corrosion environment, the corrosion rate of naphthenic acid drops with the increase of its molecular weight.───腐蝕環境相同時，環烷酸的腐蝕速率隨著環烷酸分子量的增加而降低。

英語使用場景

In this case there is a rather good correlation between resistance, half-cell potential and corrosion rate mapping.

The effects of parameters such as variability in dead and live load and corrosion rate are studied.

Corrosion rate of mild steel under wet dry alternate conditions by means of 0.

The relationship of the corrosion rate of steel and the resistance of concrete was studied to characterize the macrocell corrosion of reinforcement in the concrete containing chloride.

A linear polarization method was applied to measure corrosion rate of reinforcing bar of concrete in situ.

The numerical characteristics of transverse member corrosion rate is estimated probabilistically based on the thickness measurement data of bulk carriers on active service in COSCO.

In general, the corrosion rate of the alumina refractory and the chrome refractory in the iron phosphate melts was not higher than their corrosion rate in the DWPF melt.

The corrosion rate of carbon steel in the prefilming solution was monitored by an on line measurement system consisting of a coulostatic pertubation meter and a micro computer.

The potentodynamic scanning method can determine the corrosion rate and screened inhibitor quickly and simply.