continuous caster的意思

continuous caster中文翻譯：

連鑄機，連續鑄造機

相似詞語短語

caster───n.鑄工；腳輪；投手；調味瓶；n.(Caster)人名；(羅、法、英)卡斯特

continuous───adj.連續的，持續的；繼續的；連綿不斷的

caster wheel───腳輪

perfect continuous───現在完成進行時

present continuous───現在進行式

continuous function───[數]連續函數；連續功能

continuous flow───[流]連續流；持續氣流

continuous work───[勞經]連續工作；連續工作，連續運轉

caster oil───蓖麻油，蓖麻

雙語使用場景

This paper gave some remarks to the design and operational parameters of billet continuous caster mould.───本文對連鑄小方坯結晶器的設計和操作參數作了一些說明。

The movement of slabs in reheating furnace from two-strand thin slab continuous caster operations is discussed.───討論了兩流薄板坯連鑄連軋作業時鑄坯在加熱爐內的運動情況。

calculation, control and realization method of load balance between inverters on the straightener of continuous caster are presented.───連鑄拉矯機變頻器裝置之間負載平衡的計算、控制和實現方法。

The ASP continuous caster used in AISC was all equipped with VAI SMART sector section as well as dynamic soft reduction techniques.───鞍鋼ASP鑄機均采用奧鋼聯SMART扇形段并配有動態輕壓下技術。

Then, operation practices at continuous caster to improve inclusion removal and steel cleanliness are reviewed.───然后介紹了改善夾雜物去除和提高鋼潔凈度的鑄機操作。

The cold state characteristics of spray nozzles in secondary cooling zone of slab continuous caster were investigated.───對連鑄二冷區噴嘴的冷態特性進行了研究。

The mould is the core component of continuous caster for primary cooling and initial shell forming of liquid steel.───結晶器是連鑄機的核心部件，完成將鋼液初步凝固成型的任務。

The increase of casting speed of continuous caster could make the time shorter for the soaking of slabs.───提高連鑄機的拉坯速度可以使鑄坯均熱所需的時間明顯縮短。

Improvement on welding process of continuous caster chain bracket for Tonghua Steel Co.───通鋼連鑄機鏈條托架焊接工藝的改進。

英語使用場景

The designing and calculating method of the continuous curve chart is deduced; all types of modern continuous caster curve are analyzed by using the continuous casting curve method.

Feasibility of - line displacement of position sensor in - shaped segment of CSP sheet continuous caster is discussed.

This paper introduces the operation principle of the author developed equipment for measuring roll gap and ellipticity of the guide roller in continuous caster.

The present paper introduces the process route of LD converter Ar blowing and wire feeding slab continuous caster TMCP for producing Q345C low alloy and high strength structural steel plate.