cross feed的意思

cross feed中文翻譯：

交叉饋電

相似詞語短語

feed───v.喂養；進食；為……提供充足的食物；施肥；給（火）添加燃料；為（機器）提供原料或動力；為（某人）提供（信息、主意等）；為（水體）供水；（球類運動用語）喂（球），傳球給（隊友）；使（緩慢平穩地）移動；使穿過（有限的空間）；增進；放牧；撫養（家庭等）；（非正式）滿足（毒癮）；n.飼料；飼養；（尤指給動物或嬰兒）喂食；進食；（動物或嬰兒的）一餐；（機器的）進料裝置；（機器、設備的）原料供給；（衛星或網絡）轉播；（計算機的）訂閱源

feed stock feed───飼料飼料

feed like───喂得像

cross───vi.交叉；雜交；橫過；n.交叉，十字；十字架，十字形物；adj.交叉的，相反的；乖戾的；生氣的；vt.雜交；渡過；使相交

parasitically feed───寄生性飼料

feed him───喂他

feed to───向…提供食物；供應給

feed at───饋送

daphnia feed───水蚤飼料

雙語使用場景

During a facing operation, feed is provided by the cross slide, whereas the depth of cut is controlled by the carriage or compound rest.───在端面車削操作中，進給由橫向滑板提供，而切削深度則通過大拖板或復式刀架控制。

This article describes the vertical and cross feed mechanism for both metric and inch system. It is able to perfom automatic, rapid travelling and micro feed.───本文論述垂直和橫向進給量的公制與英制共用機構，自動快速移動和自動微量進給機構。

Those side surfaces are generated through the use of the cross feed, contrary to turning operations, where the usual longitudinal feed is used.───一般采用縱向進給的車削作業相反，那些側表面通過采用橫向進給產生。

The plunge-cut method, in which grinding is achieved through the cross feed of the grinding wheel and no axial feed is applied.───插入-切削方法：這種方法通過砂輪的橫向進給完成磨削而不采用軸向進給。

Any desired depth of cut can be obtained by the cross feed of the grinding wheel.───通過砂輪的橫向進給能得到任意所需的切削深度。

WOODWORKING MACHINES. MACHINES WORKING IN FEED DIRECTION AND CROSS FEED DIRECTION. NOMENCLATURE.───木材加工機械.縱向和橫向加工機.術語

The depth of cut is adjusted by the cross feed of the grinding wheel into the workpiece.───切削深度通過改變砂輪對工件的橫向進給來進行調整。

I suspect a cross-feed option could be interesting because some instruments feel a little too much on one side or the other.───我懷疑跨飼養選項可能是有趣的因為一些工具在一之上有點兒覺得很多邊或另一個。

With the FVS 3201, the product is fed into the agitator funnel either via a direct infeed or a frequency-controlled cross feed auger.───隨著3201通量向量分裂，產品送入攪拌漏斗，可通過直接進料或頻率控制的橫向進給鉆。

英語使用場景

Those side surfaces are generated through the use of the cross feed, contrary to turning operations, where the usual longitudinal feed is used.

In this paper, cross feed precision of cylindrical grinder micro-feed executive body combined with numerical control, i. e. of deforming micro-feed center, has been studied.

Any desired depth of cut can be obtained by the cross feed of the grinding wheel.

Groove cutting. In cut-off and groove-cutting operations, only cross feed of the tool is employed. The cut-off and grooving tools, which were previously discussed, are employed.

This article describes the vertical and cross feed mechanism for both metric and inch system. It is able to perfom automatic, rapid travelling and micro feed.

The depth of cut is adjusted by the cross feed of the grinding wheel into the workpiece.