crank angle的意思
crank angle中文翻譯:
[機]曲柄角
crank───n.想法古怪的人;脾氣壞的人;(L字形)曲柄;(非正式)脫氧麻黃堿(中樞興奮藥);(詩、文)妙語;adj.(帆船)易傾覆的;v.轉動(內燃機的)曲軸;用曲柄轉動(或啟動);把(軸、棒等)弄彎;(非正式)注射毒品;n.(Crank)(美)克蘭克(人名)
crank that───開玩笑吧
crank radio───曲柄收音機
crank simulator───曲柄模擬器
angle───n.角,角度;視角;立場;角鐵;(古)魚鉤;v.斜移;從……角度提供信息;釣魚;謀取
crank movie───怪誕電影
crank call───n.騷擾電話
healing angle───愈合角
face angle───齒面角;[數]面角
The results showed that:the combustion processes in the engine could be observed, and the flame images and pressure changes with the crank angle could be recorded;───試驗,結果表明:該裝置能夠觀測到發動機缸內的燃燒過程,能夠記錄下燃燒過程照片和缸內壓力隨曲軸轉角的變化規律;
error of transient engine speed measurement comes from both the time interval counter and crank angle measure.───瞬時轉速測量的主要誤差為晶振脈沖計數誤差和轉角計量誤差。
It can measure the oil film thickness, oil temperature, crank Angle, speed, journal center locus and minimum oil film thickness of main bearing in diesel engine.───該系統可測量內燃機主軸承的油膜厚度、油膜溫度、曲軸轉角、轉速、軸心軌跡和最小油膜厚度。
Signal process is flexible. Value at any crank angle is available by interpolation while no more tolerance is engendered.───在數據處理上具有靈活性,可計算出任意曲軸轉角處的信號值而不引入新的誤差。
The engine is motored to confirm the position of dynamic TDC, which provides accurate crank angle information for combustion analysis.───倒拖發動機確定動態上止點的位置,為燃燒分析提供準確的曲軸轉角信息。
Study of Relationship of Quick-returnCharacteristics with Crank Angle Between two Limiting Positions of planar Linkage Mechanisms───平面連桿機構的急回特性與極位夾角的關系研究
Research on Transmission Performances of the Crank Angle Between Extreme Position in Crank-slider Mechanism───極位夾角對曲柄滑塊機構傳動性能影響的研究
Range of Crank Angle Between Extreme Positions for Planar Four-bar Linkage───平面四桿機構極位夾角的取值范圍
Effect of Initial Crank Angle on Rotation Speed of Revolving Gun with Inner Energy Source───曲柄初始角度對內能源轉管武器轉速的影響
中文翻譯推薦
- cottonyarn
- cut points
- cufflink
- continuous distillation
- conducting paint
- cross liability
- crank bearing
- consolidation policy
- converter platform
- conducting parenchyma
- cut points for
- cottonyarndyed
- cross line
- continuous distiller
- core moulding machine
- crank bearing casing
- consolidation press
- conducting particles
- cut points for equal groups
- cuffs are
- continuous distribution