cutting speed的意思

cutting speed中文翻譯：

切割速度

相似詞語短語

cutting───adj.尖酸刻薄的；嚴寒的，刺骨的；鋒利的；v.切割；鑿成；剪短；把……切碎；劃破（cut的現在分詞）；n.剪報；插枝，插條；狹窄通道，路塹；切割，切斷；割下的東西；n.（Cutting）（美、澳、印）卡廷（人名）

cutting line───切割線；截線

speed───v.快速運動；加速；促進；（使）繁榮；超速駕駛；（非正式）用興奮劑成癮；n.（Speed）斯皮德（人名）；n.速度，速率；進度；迅速；繁榮；感光度；排擋；（非正式）安非他明

cutting down───研磨修整；磨掉

cutting shapes───切割形狀

cutting board───n.切肉板

cutting machine───切削機，[機]切割機；裁切機，裁剪機；截煤機；下料壓力機；切削機; 下料壓力機; 裁剪機; 裁切機

cutting paper───剪紙；裁紙

er cutting───電流變切削

雙語使用場景

Cutting speed only in the surface roughness not required when it is not important.───切削速度只有在對表面粗糙度不做要求的時候才不重要。

Exact size and high cutting speed.───尺寸精準，切割速度高。

three factors of cutting include cutting speed, feed and the depth of cut.───切削用量三要素包括切削速度、進給量和（或叫吃刀量）。

The surface roughness increases while cutting speed increases.───切割速度增大，表面粗糙度增大；

Robust construction, easy operation and fast cutting speed are among the feature of this machine.───本機結構堅固，操作方便，裁切速度快。

And it also found that the tool life of the tungsten carbide tools may be affected by the history of the cutting speed.───而且經由分析亦發現，切削速度變化之先后順序亦會對刀具壽命產生影響。

With the hydraulic control system its cutting speed can be adjusted randomly by the size and the thickness of the caliber.───它采用液壓進給，進給量切削速度可根據口徑大小、臂厚隨意調整。

There are also other variables that affect the optimal value of the surface cutting speed.───也還存在其它一些變量影響表面切削速度的最佳值。

The result shows that improving cutting speed in a certain range contributes to improve the fatigue property of the finished products.───結果表明在一定范圍內提高切削速度有利于改善零件的疲勞性能。

英語使用場景

The research indicates it is impossible that cutting speed is improved decuple in accordance with present cutting theory.

Adopting optimized machining parameters of Laser-Microjet, higher cutting speed, higher surface quality, no surface contamination, and no oxidation is visible.

With a cutting speed and a high efficiency, the stonecutter can improve the mining ratio of mines.

Increase of cutting ability or down of cutting speed can reduce the kind of lag error.

Shear angle increases with the increase in cutting speed.

The microstructure of Inconel 718 chip is continuous under low cutting speed and serrated under high cutting speed because of adiabatic shearing.

Quick cutting speed, stable arc, small and smooth margin, high efficiency, the work piece distorts slightly.

The relationships between the cutting speed and a incised workpiece of intension, thickness are analyzed.

It has simple structure, low cost, long service life, fast cutting speed, less cutting resistance and low power consumption and it is suitable for use in woodland.