青年中文青年中文

annealed的意思

annealed中文翻譯:

v.退火;鍛煉;煅燒(anneal的過去分詞)

adj.退了火的

相似詞語短語

annealer───n.[爐窯]退火爐;煉韌器

unannealed───adj.未退火的;未燜火的;未經鍛煉的

pannelled───面板

anneal───v.使(金屬、玻璃等)退火(變堅硬);使(DNA鏈條)重組成雙鏈形式;加強,使堅韌;n.退火;重組(DNA鏈條);加強

anneals───v.使(金屬、玻璃等)退火(變堅硬);使(DNA鏈條)重組成雙鏈形式;加強,使堅韌;n.退火;重組(DNA鏈條);加強

annelid───n.環節動物;[無脊椎]屬環節動物類的

annexed───adj.附加的,附屬的;v.附加(annex的過去分詞)

annulled───vt.取銷(廢除)

appealed───v.呼吁(appeal的過去分詞);求助;訴請

雙語使用場景

A well-annealed material may require many days of contact with water.───一個經過很好退火的材料需要與水接觸許多天。

The washer is usually made of annealed nickel and has a highly polished surface.───墊圈通常用退火鎳制成,具有非常光滑的表面。

To compensate for annealed wire diameter necking problem.───為了補償退火線徑變細的問題。

Hot rolled stainless steel bars that are annealed and cold worked to produce a higher surface quality and higher strength.───經過退火及冷加工的熱軋不銹鋼棒材,其表面質量更高,強度也更高。

When gill hole was enlarged and handlers was formed after annealed, the surface shallow crack and chap appeared.───當鍛件退火后進行鰓孔擴口和柄部弧形彎曲時,過熱和過燒的缺陷引起表面淺層裂紋和龜裂。

Bearing cones must be annealed prior to machining and a subsequent post heat-treat hardening.───退火軸承錐必須事先向加工和隨后的后熱處理硬化治療。

In this paper the annealed structure and its grade of bearing steel with abnormal original structure have been studied.───本文研究了非正常原始組織的軸承鋼,退火后的組織及其評級問題。

The copper is slowly drawn through the die in extremely small increments and is annealed following each drawing operation.───銅正在慢慢穿過死在非常小的增量和退火以下是每個繪圖作業。

英語使用場景

The measuring results temperature resistance of the sample annealed at 500℃ was indicative of kondo effect.

Simulated annealing uses random perturbations to shake the parameter values out of a local optimum so that globally optimal values may be found.

This suggests that careful annealing at the appropriate temperature could produce samples with a high degree of crystallinity.

The Positron lifetime spectra of unannealed and annealed Ni-coats, electro-plated from the four typical baths, have been measured.

Annealing was the heating and slow cooling process by which the resulting metal was toughened.

Tool steel is generally purchased in the annealed condition.

This led to an early invention of annealing, whereby the metal might be softened by sudden heating and quenching.

The results show that the ECP of the annealed copper alloys for lead frames can be predicted by the model.

Why shall harden steel be annealed?