青年中文cylinder valve的意思
cylinder valve中文翻譯：
[機]汽缸閥；氣瓶閥
cylinder───n.圓筒；汽缸；[數]柱面；圓柱狀物
oxygen cylinder───儲氧筒，氧氣瓶；氧氣瓶；儲氧筒
circumscribing cylinder───外切圓柱
cylinder head───[機]氣缸蓋
armorack cylinder───軍械架筒體
pneumatic cylinder───氣缸，氣壓缸
actuating cylinder───[機]作動筒；[動力]主動油缸；制動氣缸；作動筒; 主動筒; 動力氣缸; 主動油缸
valve───vt.裝閥于；以活門調節；n.(Valve)人名；(俄、芬)瓦爾韋；n.閥；[解剖]瓣膜；真空管；活門
master cylinder───[機]主缸；制動缸；控制缸；主缸; 主油缸; 控制缸
When returning cylinders to the supplier, properly close the cylinder valve, replace and secure any valve outlet seals, and properly install the cylinder cap.───返還給供應商時，正確關閉鋼瓶閥門，替換并固定閥門排氣口密封，正確安裝鋼瓶帽。
Close the cylinder valve.───關閉鋼瓶閥門。
Always close the cylinder valve when product delivery is NOT needed. Do NOT leave it open when the equipment is unattended or NOT operating.───當不需要產品輸出時，總是關閉鋼瓶閥門。當設備無人照管或沒有運轉時，不要讓閥門開著。
Leaks occurring at the cylinder valve's pressure relief device, diaphragms, or valve to the cylinder connection cannot be repaired.───發生在鋼瓶閥門的減壓裝置、橫膈膜或閥門到鋼瓶的接頭處的泄露不能維修。
At the end of the shift or work day, close the cylinder valve and bleed the pressure off the regulator and torch equipment.───在下班或工作日結束的時候，關閉鋼瓶閥門，放出調整器和吹管設備內的壓力。
Always pressurize a regulator slowly, while standing with the cylinder valve between you and the regulator.───總是站得使鋼瓶閥門位于你和調整器之間，對調整器慢慢加壓。
The cylinder valve is equipped with a dip tube that, depending on orientation, will allow either gas or liquid withdrawal.───鋼瓶閥門配備有汲取管。根據定位，可以提取氣體或液體。當閥門排氣口面朝上時，可以提取蒸氣。
Always ensure that cylinder valve is closed, outlet seal is installed gas-tight, and protective cap is in place before shipping.───在運輸之前，總是確保鋼瓶閥門關閉、排氣口密封安裝正確和保護帽在正確的位置。
Always ensure that cylinder valve is closed, outlet seal is installed gas-tight, and protective cap is in place before shipping.
Once the piston is at the bottom of the cylinder, valve 3 is closed and valve 2 opened.
Check the cylinder valve for evidence of damage or contamination.
Safety Valve, Ball Valve, Needle Valve, Y - Control Valve, Y Cylinder Valve, Check Valve Cock.
Recommended Closing Procedure: Close the cylinder valve tightly using a gloved hand.
Recommended Closing Procedure: Close the cylinder valve tightly using a gloved hand. Always wearing gloves when operating cylinder valves. NEVER use wrenches or other persuaders to operate the valve.
Always pressurize a regulator slowly, while standing with the cylinder valve between you and the regulator.
Recommended Closing Procedure: Close cylinder valve tightly using a gloved hand.