deposition rate的意思

deposition rate中文翻譯：

沉積速率；沉積速度；沉淀速度；熔敷率

相似詞語短語

deposition───n.沉積物；礦床；革職；[律]（在法庭上的）宣誓作證，證詞

digesting deposition───消化沉積

vapor deposition───蒸鍍；汽相淀積；汽相淀積，蒸鍍

deposition definition───沉積定義

rate───n.(Rate)人名；(法、塞)拉特；n.比率，率；速度；價格；等級；vi.責罵；被評價；vt.認為；估價；責罵

deposition picture───沉積圖象

deposition objections───供詞異議

deposition examples───沉積實例

deposition transcript───宣誓書

雙語使用場景

The deposition rate was decreased with increased of the temperature.───沉積速率隨溫度的增加而減少；

Influences of Oxygen Partial Pressure and Deposition Rate on Residual Stress of YSZ Thin Films.───氧分壓和沉積速率對YSZ薄膜殘余應力的影響。

effect is very significant at low substrate temperature or high deposition rate.───的影響在較低的基片溫度或是較高的沉積速率時更加顯著。

The deposition rate, microhardness, corrosion rate of low temperature iron plating layer at different temperatures are investigated.───研究了在不同溫度下獲得的低溫鍍鐵層的沉積速率、顯微硬度、腐蝕速率等性能。

Thus, using this CVD configuration a relatively high deposition rate can be achieved while obtaining desired levels of coating uniformity.───因此，使用所述CVD配置可達到相對較高的沉積速率，同時獲得所要程度的涂層均一性。

In magnetron sputtering, higher deposition rate could be helpful to deposit metal films of higher purity within shorter deposition time.───磁控濺射中高沉積速率有利于獲得高純度薄膜，節省鍍膜時間；

The microhardness can be improved at lower temperature, but deposition rate and corrosion resistance will be reduced.───溫度降低時可提高鍍層硬度，但沉積速率和耐蝕性均下降；

The deposition rate and coating thickness were determined, and the effects were compared with those of electroplating.───對鍍速和鍍層厚度進行了測定，并與電鍍進行了效果比較。

Hot cathode glow discharge plasma chemical vapor deposition is a new method to deposit high-quality diamond films with high deposition rate.───建立了快速沉積高品質金剛石膜的熱陰極輝光放電等離子體化學氣相沉積新方法。

英語使用場景

Blowing argon decreases deposition rate at appropriate range of argon flowrate.

Furthermore, the deposition rate increases per unit of welding current by decreasing wire diameter, and adjustment of the penetration depth is enabled by alternating current wave form and polarity.

MPE technique shows remarkable advantages such as single precursor, wide choices of source materials, high deposition rate, and no subsequent annealing.

The deposition rate and photosensitivity increases while the Xc decreases with the increase of silane concentration.

The deposition rate decreases with increasing duty ratio but increases with increasing frequency.

Increase of contents of potassium sodium tartrate, additive A and promoter M would improve soln. stability while reduce deposition rate. Temperature, stirring and load capacity all have effects on ...

This paper discusses how to use bottom shearing stress method to determine the resuspension rate and deposition rate, and how to select and calculate the correlative parameter.

The relationship between the flow rate of Freon ( CCI 2 F 2 ) and deposition rate and efficiency is obtained.

The deposition rate, morphologies, breakdown voltage and refractive index were studied.