depth of cut的意思

depth of cut中文翻譯：

切截深度；切刀屑厚度

相似詞語短語

depth───n.[海洋]深度；深奧

cut of───殊

great depth───大縱深；大深度

cut cut───切，切

midship depth───船中深度

axially depth───軸向深度

moulded depth───[船]型深；模深

total depth───全深比；全齒高

depth strider───縱深漫游者

雙語使用場景

machine tools were operated by craftsmen who decided many variables such as speeds, feeds, and depth of cut, etc.───機床通常是由工人操作并由他們決定機床速度、進給量、切削深度等。

Depth of cut, d, is the normal distance between the unmachined surface and the machined surface.───深度d是未加工面與已加工面之間的垂直距離。

three factors of cutting include cutting speed, feed and the depth of cut.───切削用量三要素包括切削速度、進給量和（或叫吃刀量）。

The results showed that: the depth of cut had the main influence on cutting force followed by feed rate and cutting speed in turn.───研究結果表明：切削用量中背吃刀量對主切削力的影響最大，進給量次之，切削速度對主切削力的影響最小。

The cutting operation is performed at a certain desired peripheral speed of the workpiece, feed rate, and depth of cut.───切割手術是表現在某一個理想的外設速度的工件，進給速度，切削深度。

This particular model predicts the depth of cut achievable with any given set of process parameters.───這個模糊控制模型可以預測在任何給定一組加工參數時，可獲得的切割深度。

Any desired depth of cut can be obtained by the cross feed of the grinding wheel.───通過砂輪的橫向進給能得到任意所需的切削深度。

During a facing operation, feed is provided by the cross slide, whereas the depth of cut is controlled by the carriage or compound rest.───在端面車削操作中，進給由橫向滑板提供，而切削深度則通過大拖板或復式刀架控制。

The results have indicated that the strength of AE increases slightly under super high wheel speed and large depth of cut.───結果表明，即使在砂輪超高速和大切深下，聲發射增加仍較小。

英語使用場景

As we can see in that figure, the depth of cut (and consequently the load) gradually increases on the successively engaged cutting edges.

Using the saw with an excessive depth of cut setting increases loading on the unit and susceptibility to twisting of the blade in the kerf.

Any desired depth of cut can be obtained by the cross feed of the grinding wheel.

They provide a constant depth of cut and fewer blade changes.

Depth of cut, d, is the normal distance between the unmachined surface and the machined surface.

In this paper, effects of depth of cut and feedrate on mechanical properties of metallic fiber are investigated by spinning bit.

This particular model predicts the depth of cut achievable with any given set of process parameters.

The depth of cut is adjusted by the cross feed of the grinding wheel into the workpiece.

Besides, if the feed and depth of cut is increased, the lubrication effect will become poor, and the reducing extent of the cutting force will be reduced.