diameter length的意思

diameter length中文翻譯：

直徑長度

相似詞語短語

diameter───n.直徑

length───n.長度，長；時間的長短；<語>音長

inside diameter───[數]內徑

outside diameter───外直徑；外徑

shilling diameter───先令直徑

dime diameter───一角直徑

pitch diameter───層心直徑，（齒輪的）節徑，（螺紋的）中徑；[機]節圓直徑

equatorial diameter───赤道直徑（等于12753.44公里）

hydraulic diameter───[機]水力直徑；水壓直徑

雙語使用場景

of hydrogen contained in each tube depends on tube diameter, length, and pressure rating.───每個管道的氫容量由管道直徑、長度和額定壓力決定。

Influence of different tuyere diameter, length and coke particle sizes composition on radial length, width, height and volume in BF tuyere rotary region is studied by calculation.───通過計算，研究了不同風口直徑、風口長度和高爐風口焦炭不同粒度組成對高爐風口回旋區的徑向長度、寬度、高度和體積的影響。

stability of external pressure vessel mainly depends on crust's geometrical cross-section including diameter, length and wall thickness. Among them, the length and diameter are crucial.───外壓設備的抗失穩能力(穩定性)主要取決于殼體的幾何尺寸，即直徑、長度和壁厚，其中長度和直徑起著決定性作用。

The amount of hydrogen contained in each tube depends on tube diameter, length, and pressure rating.───每個管道的氫容量由管道直徑、長度和額定壓力決定。

Third stage of operation in the cage department; size blanks uniformly to proper outer diameter length and inner diameter dimensions.───保持架加工的第三步工序；將毛胚件加工到適當的長度和內徑。

The diameter, length, arch height and space of bond-wires have great impacts on the radio frequency performance of RF power transistor.───鍵合線的直徑、長度、拱高和并列鍵合線間距等物理參量，均對器件性能有很大影響。

Appearances showed that the plant height, stem diameter. Length and width of maximum Leaf increased.───外觀上則表現為：增大了株高、莖粗、最大葉長和最大葉寬。

Diameter, length and volume of gas bubble increase with the gas pressure, and decrease with screw rotational speed.───氣泡脫離噴嘴的時間承受隨進氣壓力和螺桿轉速的升高而減小。

Diameter, length, and location of pipeline.───管道的直徑，長度和安裝地點。

英語使用場景

Methods: The cholecystic beds of 128 livers were dissected and the diameter, length, route and position of the middle hepatic vein and its branch in cholecystic bed were observed and measured.

SIZER : Third stage of operation in the cage department; size blanks uniformly to proper outer diameter length and inner diameter dimensions.

Third stage of operation in the cage department; size blanks uniformly to proper outer diameter length and inner diameter dimensions.