die temperature的意思

die temperature中文翻譯：

模溫；核心溫度

相似詞語短語

temperature───n.溫度；體溫；氣溫；發燒

die die die───死吧，死吧

die die───模具

critical temperature───[物][電子]臨界溫度；n.臨界溫度

temperature outside───室外溫度

temperature rise───[電]溫升；溫度上升；溫度上升，溫升，升溫

constant temperature───[熱]恒溫；定溫；等溫；等溫，恒溫

fluctuating temperature───波動溫度；脈動溫度；脈動溫度，波動溫度

low temperature───低溫，低溫度；[物]低溫

雙語使用場景

Die temperature has great effects on the cell structure and foam properties.───機頭發泡口模溫度對發泡體結構和性能有關鍵性影響。

Second, improved crystalline behavior, speeded up the crystallization velocity, reduced the die temperature.───其二，改變結晶行為，加快結晶速度，降低成型加工模溫。

Does the gate velocity of the metal influence the die temperature?───澆口的速度是否影響模具的溫度？

Again pulling out the textbook, I demonstrated how base-emitter voltage relates directly to the die temperature, as well.───再次掏出教科書，我證明了與死區溫度的直接聯系基射極電壓。

Neural network method was used to investigate the parison swell affected by the die temperature and extrusion flow rate.───采用神經網絡方法預測了受模口溫度和擠出流率影響的型坯成型階段的膨脹。

A die temperature controller which uses heating medium oil with high temperature to control the die temperature of magnesium was introduced.───介紹了一種利用高溫導熱油來控制鎂合金壓鑄模溫度的設備。

check die temperature and glue viscosity, test each batch of finished pads.───檢查模具溫度和膠水的粘度，測試每一批成品墊。

Industry: Stamping die; Temperature Switches; Computer processing; Mold; Instrument Processing; Temperature control (adjustable) devices;───所屬行業：沖壓模；溫控開關；電腦產品加工；模具加工；儀器儀表加工；溫度控制（調節）器；；

Design and Development of a New Die Temperature Controller for Magnesium Die Castings───一種新型鎂合金壓鑄模具溫控機的設計開發

英語使用場景

The extrudate's total polyphenol content and total catechin content were independent of the die temperature.

Neural network method was used the parison swell by the die temperature and extrusion flow rate.

The results show that the DBRF changes greatly with the increase of die temperature, which has unnegligible influence on the accuracy of the mathematical solution model for DBRF.

The relation between extrudate density and screw speed, die temperature is also discussed.

The network inputs include extruder temperature, die temperature , melt flow rate, air flow rate, die to-collector distance.

Again pulling out the textbook, I demonstrated how base-emitter voltage relates directly to the die temperature, as well.

Die temperature has great effects on the cell structure and foam properties.