effective thickness的意思

effective thickness中文翻譯：

有效厚度；有效壁厚

相似詞語短語

thickness───n.厚度；層；濃度；含混不清

effective───adj.有效的，起作用的；實際的，實在的；給人深刻印象

corneal thickness───[醫]角膜厚度

slice thickness───[醫]層面厚度

cornea thickness───角膜厚度

thickness gauge───厚薄規，測厚儀；厚度計

effective treatment───有效治療

girdle thickness───腰厚度

effective tactics───有效戰術

雙語使用場景

can solve the problem of plotting the effective thickness of very low permeable sandstone reservoir.───地解決了特低滲透砂巖儲層有效厚度的劃分問題。

When used at oblique Angle, the effective thickness of each layer becomes thinner than that at normal Angle.───當光線傾斜入射時，各層光學薄膜的有效厚度變薄。

reservoir effective thickness was the reservoir gas showing thickness.───儲集層有效厚度為儲集層氣顯示厚度。

The reservoir effective thickness was the reservoir gas showing thickness.───儲集層有效厚度為儲集層氣顯示厚度。

To choice wells for fracturing, the wells with greater effective permeability and effective thickness should be targeted.───在做壓裂選井時，應選擇有效滲透率和有效厚度都較大的井進行壓裂；

When calculating oil and gas reserves by volumetric method, one factor affecting the computing accuracy is reservoir effective thickness.───用容積法計算油氣儲量時，影響儲量計算精度的因素之一是儲層有效厚度。

Textile floor coverings. Determination of the apparent effective thickness of the backing.───編織地毯.背面加襯厚度的表觀效果測定

Based on the reservoir plotted section and effective thickness, it determines the gas bearing area and oil bearing area.───依據油躲剖面圖和有效厚度發育情況圈定了含氣、含油面積。

Apparent Effective Thickness Prevision through Spontaneous Potential Method and Its Application in oil Development───自然電位視有效厚度預測及在油田開發中的應用

英語使用場景

To choice wells for fracturing, the wells with greater effective permeability and effective thickness should be targeted.

Based on the reservoir plotted section and effective thickness, it determines the gas bearing area and oil bearing area.

When used at oblique angle, the effective thickness of each layer becomes thinner than that at normal angle.

In addition, classification standards for reservoir effective porosity, oil bearing saturation and effective thickness have been established and applied in reserve calculation of 8 blocks.

The weld size was controlled according to the definition of leg on the corner joint and DL/T869—2004 (power plant welding technical regulation), which led to the effective thickness was insufficient.

By the way of improving roller dimensions, roller number, outer roller path diameter , stop groove diameter and the effective thickness , the using reliability of the bearing is advanced.