equivalent stress的意思

equivalent stress中文翻譯：

[力]等效應力；折算應力；相當應力

相似詞語短語

equivalent───n.對等的人（或事物）；當量；adj.（在價值、數量等方面）相等的；等價的；等效的；等量的；同意義的

stress───n.壓力；強調；緊張；重要性；重讀；vt.強調；使緊張；加壓力于；用重音讀；n.(Stress)人名；(意)斯特雷斯

equivalent of───同等物

alternating stress mean stress───交變應力平均應力

equivalent fractions───等值分數

algebraically equivalent───代數等價

shear stress───[力]剪應力；[力]剪切應力；剪應力; 切變應力; 切應力; 粘性摩擦應力

equivalent weight───[化學]當量

equivalent effect───同等效果；[醫]同等作用

雙語使用場景

of the finite element equivalent stress method in engineering design practice is described.───介紹有限元等效應力法在拱壩設計中的運用實例。

finite element internal force method for calculating arch dam equivalent stress is improved.───有限元內力法求解拱壩等效應力分析方法進行了進一步改進。

variation of equivalent stress near the hole wall with the depth of the teeth pressed is analyzed.───詳細分析了孔眼壁附近的等效應力隨牙齒壓入深度的變化關系。

The result of max equivalent stress is smaller than the results of single calculation.───這個結果與前期有限元分析結論是一致的。

The optimal gate project have been found out by comparing the equivalent stress, strain and the graph of speed.───通過比較等效應力應變值及速度曲線，得出了最佳的澆口方案。

When the rotational speed of the tools is increasing, the displacement, most equivalent stress and strain grow.───刀具的位移、最大等效應力、應變隨轉速的增加而增大。

Significant difference in the equivalent stress was observed for different materials.───不同材料中的等效應力差異顯著。

This design using the finite element method, the equivalent stress of the above-mentioned has solved the problem of stress concentration.───本次設計采用了有限元等效應力法，已解決上述提到的應力集中問題。

Observe the equivalent stress and plastic structure of strain and stress distribution can determine the structure of danger point failure.───觀察結構的等效應力和塑性應變和應力分布可以確定結構的失效危險點。

英語使用場景

The finite element internal force method for calculating arch dam equivalent stress is improved.

Moreover the load effect ratio and conversion coefficient of equivalent stress is defined for practical application.

The numerical simulation results show that the equivalent stress intensity factors KIeq relates with the engine firing order, their peak value rises while the crack depth increases.

This work studies the maximum equivalent stress on the component and the allowable amount of interference for an interference fit based on the maximum distortion energy theory.

Torsion deformation is the biggest effect factor on elastic limit equivalent stress.

It is cumbersome to analyze dam equivalent stress for the finite element results of arch dam.