explosive welding的意思

explosive welding中文翻譯：

[機]爆炸焊接；爆炸成形

相似詞語短語

explosive───n.炸藥；爆炸物；adj.爆炸的；爆炸性的；爆發性的

welding───v.焊接；（使）緊密結合，成整體；焊接（物件）；（通過熔化或軟化）連接（weld的現在分詞）；n.焊接，鍛接

mig welding───金屬惰性氣體電弧焊

highly explosive───高度爆炸性

bevelling welding───坡口焊

high explosive───[化工]烈性炸藥；高爆炸藥；猛炸藥；n.高性能炸藥，烈性炸藥

explosive diarrhea───爆發性腹瀉

welding nut───焊接螺母；[機]焊裝螺孔塞

welding electrode───焊條；電焊條；[機]焊接電極；焊接電極，焊條，電焊條

雙語使用場景

welding parameters are very important in the explosive welding.───在爆炸焊接中，爆炸焊接參數的確定是非常重要的。

course of metal explosive welding and its essence of metal physics was described.───簡述了金屬爆炸焊接的過程和它的金屬物理學本質。

In the research of explosive welding between tubes, it is necessary to evaluate quantitatively the parameters of the moving tube.───在圓管與圓管的爆炸復合研究中，需要對管的動態參數做定量的估計。

This provides a useful reference for development and application of explosive welding technology.───為爆炸焊接技術和爆炸復合材料的推廣應用及發展創造了條件。

The temperature rise near explosive welding interface is caused by explosive adiabatic compression and abnormal energy deposition.───爆炸焊接界面附近溫升是由爆炸絕熱壓縮和畸形變形能沉積兩者造成的。

In order to obtain ideal compound quality, the explosive welding parameters must be correctly chosen.───為了獲得理想的復合質量，必須正確選擇爆炸焊接參數。

Some preparation technology, such as the method of water quenching the molten alloy and explosive welding, are briefly introduced.───同時簡單介紹了熔體水淬法、爆炸焊接法等制備技術。

Analysis and Comparison of The Theoretical Calculation Velocity of Flying Plate with The Result of Experiment in Explosive Welding───爆炸焊接中飛板運動速度的理論計算與實驗結果的對比分析

英語使用場景

Although the interface has the features of melt, and pressure welding, the molten and diffusion welding cannot explain the bonding mechanism of explosive welding.

A series of stress waves was successfully detected on explosive welding site, using piezoelectric crystal sensors pre positioned at different depth of soil anvil.

The bend angle of the flyer plate was determined by flash X-ray photography during explosive welding and the value coincides with that obtained in the semicylinder test.

Some preparation technology, such as the method of water quenching the molten alloy and explosive welding, are briefly introduced.

This kind of defect can be eliminated by amending parameters of explosive welding and increased the rate of final products of big and thick stainless steel clad plate.