extrusion pressure的意思
extrusion pressure中文翻譯:
[機]擠壓力
extrusion online───擠出聯機
joggled extrusion───點動擠壓
extrusion companies───擠壓公司
pressure───vt.迫使;密封;使……增壓;n.壓力;壓迫,[物]壓強
extrusion thermoforming───擠壓熱成型
extrusion gis───擠壓地理信息系統
extrusion reflex───擠壓反射
hydraulic pressure───液壓;水壓;n.水壓; 液壓
pressure from───來自于……的壓力
three dimensional upper bound analysis technique for calculating the extrusion pressure of a spline shaft was presented in this paper.───本文給出了花鍵軸開式整體凹模擠壓時擠壓力計算的三維上限分析法。
The effect of billet size on the effective strain and unit extrusion pressure was investigated during equal channel angular pressing.───研究了坯料尺寸對等徑角擠壓材料等效應變及單位擠壓力的影響。
It will reduce extrusion pressure, energy consumption and die loss.───降低擠壓力,減少能耗及模具損耗。
Also the extrusion pressure is not affected by length of the billet in the extrusion press since friction is not involved.───可見,缸體內的坯料保持靜止,沒有產生摩擦力,擠壓力也不會受坯料長度影響。
The extrusion pressure was lower than that of pure EPDM, and its decreasing range was larger with increasing mass fraction of PPA.───加入PPA可以改善EPDM擠出物的外觀,且擠出壓力低于純EPDM,PPA質量分數越大,其降低幅度越大。
System in the Lord by high-pressure liquid role in realizing fortress produce extrusion pressure columns work demands.───系統通過高壓液體作用在主柱塞上產生擠壓力以實現工作需求。
The Comparison and assess of Calculating Methods of Backward Extrusion Pressure for Aluminum Alloy Cups───鋁合金杯形件反擠壓力計算方法的評比
Prediction of Unit Extrusion Pressure of Steel Products with BP Neutral Network───利用BP神經網絡預測鋼材單位擠壓力
In this paper the extrusion pressure between the stud and the workpiece during stepping arc stud welding process is acted as the controlled variable so as to control the stud plunge depth.
Some fuzzy concepts exist in resolving forward extrusion solid object's unit extrusion pressure with slip line technique in current documents.
中文翻譯推薦
- extrusion pressing
- extrusion press
- extrusion process
- extrusion ram
- extrusion ratio
- extrusion pump
- extrusion rate
- extrusion product
- extrusion rheometry
- extrusion rheometer
- extrusion rheometre
- extrusion speed
- extrusion quality
- extrusion spinning
- extrusion screw
- extrusion stress
- extrusion stabilityl
- extrusion stem
- extrusion swelling
- extrusion stroke
- extrusion swell