filling rate的意思

filling rate中文翻譯：

填充率

相似詞語短語

filling───n.(Filling)人名；(瑞典)菲林；n.填充；填料；v.填滿；遍及（fill的ing形式）

filling machine───灌裝機；[食品]充填機；銼鋸機；裝料機; 灌注機器; 充填機械; 加料機

rate───n.(Rate)人名；(法、塞)拉特；n.比率，率；速度；價格；等級；vi.責罵；被評價；vt.認為；估價；責罵

filling stations───汽車加油站（等于gasstation）

filling into───填充

filling up───填補；裝滿；堵塞；[機] 埋乞法; 裝滿

dental filling───補牙

filling date───交發日期；申請日；交發日期，填寫日期

fuel filling───加油；加注燃油；填充燃料

雙語使用場景

Photosynthetic matter transportation ratio and filling rate were higher.───光合物質轉運率高，灌漿速度快。

Filling accuracy: The filling rate shall be reduced for product with requirement for high accuracy.───灌裝量的精度，精度要求高的，則灌裝速度應該調慢。

On the basis of predecessors study, a new method for calculating free-filling rate was proposed.───在前人研究基礎上，提出了一種新的自由充填速率計算方法。

Correlation analysis suggested the grain filling rate was the main factor affecting maize yield.───相關分析表明，群體籽粒灌漿速率是影響產量的主要因素。

Decrease of grain filling rate, not decrease of grain filling duration was the major reason for declined grain weight at shading treatments.───弱光處理后籽粒粒重的降低主要是平均灌漿速率顯著降低所致，而灌漿持續期長短對其影響較小。

These results show that the main causes of poor grain filling are later filling initiation and lower filling rate of inferior grains.───由此說明，部分亞雜組合籽粒充實不良的主要原因是弱勢粒灌漿啟動期滯后與灌漿速率小。

The discrepancy of grain weight among the same cultivar might result from the difference of grain filling rate.───同一品種的粒重差異來源于灌漿速率的不同。

Both the filling quantity and filling rate can be arbitrarily adjusted with high accuracy.───灌裝量和灌裝速度均可任意調節，精度高；

Two 9-millimeter channels transfer water from the lower reservoir at a filling rate of five to seven seconds when the pack is squeezed.───兩個9毫米渠道轉移水從下水庫在充盈率五至七秒時，包擠壓。

英語使用場景

But it was easier to overfill in CPP , while in ZOE, the deficient - filling rate is higher.

Filling duration, occurrence time of maximal filling rate, duration of slight-increase period, and slight-increase period filling rate were less affected by weak light and high temperature.

In the wake of the diminution of helical lead angle the influencing extent of the variation of materials filling rate inside the screw conveyer on the screw shaft deflection was reduced.

The results showed that starting from 14 days after anthesis, root senescence of winter wheat was accelerated, corresponding with the peak stage of grain filling rate.

The results obtained show the consumptions of shaft power and electric power are directly proportional to mill speed and filling rates, and running torque bears relation only to filling rate.