青年中文青年中文

firing temperature的意思

firing temperature中文翻譯:

[陶瓷]燒成溫度;點火溫度;發火點

相似詞語短語

firing───n.開火;發射;燒制;解雇;n.(Firing)(挪、美、荷、加、丹)法爾林(人名);v.開火;燒制;解雇;點燃;激勵(fire的現在分詞)

temperature───n.溫度;體溫;氣溫;發燒

firing pattern───爆破鉆孔型式,鉆孔布置平面圖;放電模式

firing line───作戰最前線,射擊線;n.射擊線,作戰最前線

critical temperature───[物][電子]臨界溫度;n.臨界溫度

firing pin───[軍]撞針;撞針; 擊針

firing order───射擊[點火]次序(指內燃機氣缸);[動力]點火次序(指內燃機氣缸);射擊次序

temperature outside───室外溫度

temperature rise───[電]溫升;溫度上升;溫度上升,溫升,升溫

雙語使用場景

The high temperature foamed ceramic produced has low firing temperature, short duration of firing, wide range of firing temperature and easily control production.───鉛硼硅系統,研制出具有低燒成溫度、低熱膨脹系數的色釉,用作粘土釉面瓦釉料,其外觀、物理、化學性能均能滿足質量要求。

glaze of low firing temperature and low expansion coefficient, to match the glaze tile made from common clay, was prepared in lead borosilicate system.───鉛硼硅熔決釉研制出同時符合普通粘土瓦坯的燒成溫度低、熱膨脹系數低這兩個主要性能特點的釉料。

The factors which affect the firing temperature of the glaze were discussed, and the opacifying mechanism of glaze was also approached.───探討了影響釉燒成溫度的諸因素及釉的乳濁機理。

MLC inner Electrode. Suitable for ceramic with high firing temperature.───多層瓷介電容器用內電極漿料,適用于高燒產品

MLC inner Electrode. Suitable for ceramic with middle or low firing temperature.───多層瓷介電容器用內電極漿料,適用于較低燒溫的產品

MLCC MLC inner Electrode. Suitable for ceramic with low firing temperature.───多層瓷介電容器用內電極漿料,適用于低溫

MLC inner Electrode. Suitable for ceramic with low firing temperature.───多層瓷介電容器用內電極漿料,適用于低燒產品

Siliceous zinc is blue firing temperature is highest it is 1280 degrees.───硅酸鋅藍的燒成溫度則最高為1280度。

英語使用場景

The main factors for preparation were studied, including the proportion of raw materials, firing temperature and time, reducing atmosphere, flux and so on.

Kyanite calcined at two temperatures is used as raw material to prepare calcined kyanite. Their firing temperature, high temperature properties, thermal shock and microstructure have been studied.

The dependences of seepage velocity and bending strength on agglomerant content, forming pressure, particle diameter of the aggregate, soaking time, firing temperature and so on were discussed.

It is analyzed that Mossbauer parameter variations of clays from the famous sites of ancient kilns change with firing temperature, firing time and firing atmosphere in firing process.

As substitution of diopside for talc, the body has lower firing temperature and widening sintering range. The property of diopside porcelain is in keeping with standard of high frequence dielectric.

When spodumene was added in the products, the cause for reducing firing temperature, enhancing mechanical strength and heat-shock resistance, possessing good chemical stability was clarified.

In this paper, the varying laws of the properties of cordierite-containing honeycombedceramic were studied when firing temperature and hold time were changed.

The microstructure of corundum-mullite duplex can be controlled by adjusting microsilica, alumina and firing temperature, which can improve hot strength of corundum-mullite duplex ceramic.

This article introduces the development of color sol-gel coating glass, and details the fomulation and stability of sol-gel solution as well as immersed glass' raised velocity and firing temperature.