flange bolt的意思
flange bolt中文翻譯:
[機]法蘭螺栓;凸緣螺栓
bolt flange───螺栓法蘭
flange───n.[機]法蘭;[機][古生]凸緣;輪緣;邊緣;vt.給…裝凸緣
bolt───vi.(門窗等)閂上,拴住;沖出,跳出;(馬等的)脫韁;囫圇吞下;vt.篩選;囫圇吞下;(把門、窗等)閂上;突然說出,脫口說出;n.螺栓,螺釘;閃電,雷電;門閂;弩箭;(布的)一匹,一卷;adv.突然地;像箭似地;直立地
blind flange───盲板;堵塞法蘭;蓋板; 悶頭法蘭
flange bolts───突緣螺絲
flange plumbing───法蘭管道
mounting flange───定位凸緣;[機]安裝用法蘭;支承法蘭;固定法蘭
flange tool───法蘭桿
flange dots───凸緣圓點
In this paper presents optimum design of flange bolt connection with constraint of strength reliability.───本文以強度可靠度為約束,對法蘭螺栓聯接進行了優化設計。
When a bolt is not to play in a large flange bolt hole welding place.───在打螺栓孔的時候是不可以把螺栓孔打在有大型法蘭焊口的地方的。
Valves can also be furnished with flange bolt holes drilled for through bolting, except in the chest area.───閥門也可以配置法蘭螺栓孔,用于貫穿式螺栓,但不能穿過閥腔區域。
As a general rule, piping flanges should be concentric to pump nozzles to within the flange bolt hole clearance tolerance.───管路法蘭與泵口要同心,偏差不能超過法蘭螺栓孔尺寸公差。
Stainless steel, aluminum. Under the operating condition of deep cooling, the materials of ring and flange bolt are the same.───不銹鋼、鋁。深冷工況下,環與法蘭螺栓同材料。
Note: 1. Size - Nominal diameter of the valve; D1 - Diameter of the flange bolt hole center circle; D - Diameter of the flange bolt holes.───注:1。規格尺寸為閥門通徑尺寸;D1為閥門法蘭孔中心分布圓尺寸;D為法蘭孔直徑。
Draw the flange bolt holes across the center line with a ruler, assemble───用直尺劃出法蘭螺栓孔跨中線,與筒體縱縫線平行組裝。
Leak through diaphragm or around flange bolt holes of relief valve───隔膜或環繞安全閥法蘭螺栓孔泄漏
中文翻譯推薦
- flammability limit
- flange bracing
- flange bolted
- flange connector
- flange chuck
- flang p
- flange connection
- flange angle
- flange cooler
- flange diameter
- flange edge
- flange cross section
- flange edge welding
- flange edge weld
- flange end
- flange fitting
- flange fittings
- flange gasket
- flange jointing
- flange mount
- flange moulding