fracture surface的意思

fracture surface中文翻譯：

斷裂面

相似詞語短語

surface───vi.浮出水面；vt.使浮出水面；使成平面；adj.表面的，膚淺的；n.表面；表層；外觀；n.(Surface)人名；(英)瑟菲斯

fracture───vt.使破裂；n.破裂，斷裂；[外科]骨折；vi.破裂；折斷

calcaneal fracture───[醫] 跟骨骨折

fracture strain───斷裂應變

surface data───曲面數據；表面數據；地面資料

placid surface───平靜表面

hot surface───熱表面; 放熱地面

navicular fracture───舟骨骨折

metatarsal fracture───[醫] 跖骨骨折

雙語使用場景

The fracture surface traverses matrix as well as fibers and interface .───斷裂表面橫切過基體、纖維和界面。

Scatter and fracture surface roughness increases with loading rate.───分散性和斷裂表面的粗糙度隨加載率而提高。

fatigue fracture surface features of blade are summarized firstly.───歸納總結了葉片疲勞斷口的特征形貌。

Rough fracture surface is of characteristics of fractal and can be considered as congruence of the upper and lower fracture surfaces.───巖體裂隙面是粗糙不平的，具有分形特征。

The spiral shape of the fracture surface indicates that the shaft had been overloaded by a high torque prior to breaking.───螺旋外形地斷裂面標明，該井已超負荷由一個高轉矩之前，要突破。

However, for AISI 316, hydrogen barely changed the fracture surface morphology of notch specimen in comparison with that in air.───然而，對AISI316而言，和在空氣中測試的試片比較起來，氫氣幾乎沒有改變凹槽試片的破斷面形態。

The fracture surface of a failed injection valve nut of diesel engine high pressure oil pump was investigated by visual and SEM.───對斷裂的汽車柴油機高壓出油閥緊座的宏觀、微觀斷口及顯微組織進行了研究。

The effects of testing temperature on notch impact strength, fractographic features and fracture surface roughness of PVC have been studied.───研究了溫度對聚氯乙烯PVC缺口沖擊強度、斷口形貌特征及斷面粗糙度的影響。

And the fracture mechanism was analyzed by observing the fracture surface morphologies through scanning electron microscope.───采用掃描電子顯微鏡對其斷口形貌進行觀察；

英語使用場景

The fracture surface indicates that the mechanism of the superplastic deformation in AZ91 alloy is controlled by the grain boundary sliding accompanied with cavities interlinking.

The effects of macroscopic fracture surface patterns and microstructure of slag of stainless steel electrode on the slag detachability have been analyzed.

The impact fracture surface showed a tough morphology for POM/NBR/Novolak blends and brittle one for POM/NBR blends.

The microstructure and fracture surface of the two ultrahigh strength steels are analyzed by metalloscopy and scanning electron microscopy (SEM).

The ultimate fracture surface was also proposed. The calculated alternating stress intensity of the structure confirmed the fatigue failure position ulteriorly.

The fracture surface appeared intergranular crack, due to the oxide formed during tensile test.

The Scanning electron microscopy(SEM) photographs of fracture surface of the hybrid material show that the hybrid material presents homogeneous system without obvious inorganic particle forming.

The fracture surface is rather rough in sinusoidal vibration, while is smooth in random vibration.

Microstructure, properties and fracture surface of high strength titanium alloy TB 2 cross - rolled tube were studied.