cogging的意思
cogging中文翻譯:
n.接頭;齒輪;鑲齒效應
v.給…裝配輪齒(cog的ing形式)
clogging───v.阻塞;(使)阻塞,堵塞;塞滿(濕厚物);阻礙;(血或乳脂)凝結成塊;跳木鞋踢踏舞(clog的現在分詞);adj.阻塞了的
coggling───巧思
crogging───嘎嘎作響
scogging───烤焦
bogging───n.沼澤土化;陷入;沉入;v.陷入泥沼;陷入困境(bog的ing形式)
dogging───n.慢跑;繩頭插接;鉤卡,夾鉗住
fogging───n.成霧,蒙上水汽;迷惑試驗
hogging───n.撓度;扭曲;v.拱起背;貪婪攫取(hog的ing形式)
jogging───n.慢跑;v.慢跑(jog的ing形式);輕推;喚起
A cogging torque measurement system was proposed, which was composed of stepping motor, torque sensor, etc.───了一種由步進電機、轉矩傳感器等元件組成的齒槽轉矩測試系統。
The first stage is called primary rolling, or cogging.───這個階段叫作初軋或開坯。
The niobium strips were fabricated by forging-cogging, rolling and heat treatment.───開坯、軋制、熱處理工藝對鈮帶深沖性能的影響。
The cogging torque was the main factor that causes a PM stepping motor to be vibrated, noisy and even influences its safe operation.───齒槽轉矩是引起永磁步進電機振動、噪聲甚至影響其安全運行的主要因素。
This paper is concerned on studying the logging force and optimizing the sleeve length of the iron- cored to reduce the cogging force.───該文通過對電機定位力的分析并通過優化電機鐵心的軸向長度,使其定位力得到有效抑制。
Since the LSR to be detected with cogging structure, which makes the gap sensor's output with cogging effect.───由于被檢測體長定子軌道具有齒槽結構,使得傳感器的輸出具有齒槽效應。
However, the interaction between the permanent magnet and slotted armature lamination produces cogging, which may cause noise and vibration.───然而由于永磁體與有槽鐵心相互作用,產生齒槽轉矩,引起振動和噪聲。
Cogging torque is one of the main concerns of permanent magnet motor.───齒槽轉矩的削弱一直是永磁電動機研究的重點之一。
The cogging torque can be reduced efficiently by suitable selection of the relative angle between dual stators .───選擇合適的內外定子相對位置,可有效地削弱齒槽轉矩。
I decided to set up my own business because I was tired of just being a cog in a machine.
Tired of being a tiny cog in a vast machine, he handed in his resignation.
When the large cog wheel engages , the mill stone will start to go round.
The wheel engages with the cog and turns it.
The teeth of the cog should fit into these grooves.
The cogs gear smoothly.
Mr Lake was an important cog in the Republican campaign machine.
The firm tries hard to make its employees feel that they are more than simply cogs in the wheel.
The two cog wheels engaged and the machine started.