hand hole的意思

hand hole中文翻譯：

手洞

相似詞語短語

hand-hole───n.探孔；手孔

hole───vt.鑿洞；vi.鑿洞，穿孔；（高爾夫球等）進洞；n.(Hole)人名；(瑞典、挪)霍勒；(英)霍爾；n.洞，孔；洞穴，穴；突破口

drilling hole───鉆孔

through hole───透眼，透孔，通孔

castellation hole───蜂窩孔

he hole───he洞

weepers hole───泄水孔

jackson hole───杰克遜霍爾（地名）

last hole───[體]最后一穴

雙語使用場景

Quick-open hand hole is set at lower part of the concentrator to clear residual liquid and slag inside the concentrator.───在濃縮罐下部設置了快開式手孔，以使清理罐內殘液，殘渣；

hole cleanout - provides easy access to the heater interior for inspection and cleaning.───清洗孔- - -使人工觀察和清洗熱水器內部更加方便。

Simple design, barrel stool + soft cushions, with hand hole, light but not simple, but cute elegance, is home-very useful working benches, stools, makeup for shoes stool!───簡約設計，桶裝凳身+軟坐墊，設有手提孔，輕便但不簡陋，優雅但不失可愛，是居家很實用的周轉凳、換鞋凳、化妝凳！

position and size of hand hole and bolts upon the segment joint design of large-section river-crossing shield tunnels are also investigated.───研究分析了手孔和螺栓數量及布設位置、尺寸等對大斷面越江盾構隧道管片接頭選型及設計參數的影響。

Basins are provided with a 4 " caulk inlet, 3" vent, and a large removable hand hole to permit access, as a standard.───根據標準，水槽配有4“填縫進水管、3”通風孔和便于使用的大型可移動手洞。

pump casings are not acceptable. The pump casing shall have an integrally cast hand hole supplied with a hand hole cover.───中心線排放泵殼是不可接受的。泵殼上應該具有整體鑄造的探孔，并配置探孔罩蓋。

Hand hole cleanout - provides easy access to the heater interior for inspection and cleaning.───人工清洗孔---使人工觀察和清洗熱水器內部更加方便。

Choose any two lower headers, cut hand hole and clear dirt inside, check corrosion state and repair the leakage.───任意選擇二下聯箱，割開其聯箱手孔，清除內部污垢，檢查腐蝕結垢情況，消除泄漏。

Before bubble bath, yao Xianqing clean skins, lest hand-hole jams, the absorption of eduction of block up sweat and thin body factor.───泡澡之前，要先清潔肌膚，以免手孔堵塞，阻礙汗水排出與瘦身因子的吸收。

英語使用場景

The pump casing shall have an integrally cast hand hole supplied with a hand hole cover.

Hand hole cleanout - provides easy access to the heater interior for inspection and cleaning.

Basins are provided with a 4" caulk inlet, 3" vent, and a large removable hand hole to permit access, as a standard.

The hand hole cover shall be constructed of the same material as the pump casing and shall have surfaces which match the internal casing contours to minimize turbulence and localized wear.

The paper respectively studies the principles and features for profiling attachment and slider crank mechanism to be used as clamping apparatus to fabricate oval hand hole cover.