contact fatigue的意思

contact fatigue中文翻譯：

[力]接觸疲勞；接觸疲憊

相似詞語短語

contact───vt.使接觸，聯系；n.接觸，聯系；vi.使接觸，聯系

fatigue coronavirus───疲勞冠狀病毒

epididymitis fatigue───附睪炎疲勞

compassion fatigue───捐贈疲軟；由于過分暴露于人類痛苦而造成的憐憫心或同情心之喪失

fatigue symptoms───疲勞癥狀

profound fatigue───極度疲勞

paleness fatigue───蒼白疲勞

fretting fatigue───磨蝕疲勞；微動疲勞

fatigue strength───[力]疲勞強度；疲乏強度，疲勞強度

雙語使用場景

The mechanism of the good contact fatigue resistance of the alloy was investigated.───同時，對該合金優良的接觸疲勞抗力的來源進行了探討。

Experiments of contact fatigue under the action of combined stresses-Hertsian stress and rotating bending stress were carried out.───赫茲應力和旋轉彎曲應力聯合作用下的接觸疲勞進行實驗研究。

Surface defects in ceramic bearing balls may significantly affect ball strength and reduce rolling contact fatigue lifetime.───陶瓷軸承球的表面缺陷會嚴重降低球的強度和滾動接觸疲勞壽命。

Through experimental comparison, the new process method can significantly improve the contact fatigue life of the coating layer.───通過實驗對比，這種新工藝方法可以顯著地提高涂層的接觸疲勞壽命。

Theory foundation may be provided by calculation results to analyze the rolling contact fatigue life of ceramic balls.───計算結果為陶瓷球的滾動接觸疲勞壽命分析提供理論基礎。

The rolling contact fatigue life and wear life of Silicon nitride ceramic balls are determined by critical stress in a way.───氮化硅陶瓷球臨界應力在很大程度上決定其滾動接觸疲勞和磨損壽命。

It improves the rolling contact fatigue behaviour and the wear resistance, especially under mixed friction conditions.───它提高了滾動接觸疲勞的行為和特別是在混合摩擦條件下的耐磨性。

The numerical results show that the gear contact fatigue life is connected with gear rotational velocity.───數值計算結果表明：齒輪傳動的接觸疲勞壽命與齒輪轉速戚息相關。

英語使用場景

The result shows that rolling contact fatigue failures caused swap block defects of rail.

But the study on the rolling contact fatigue failure mechanism of super hard material coati-ngs is in grope.

The paper analysed contact fatigue performances of vacuum degasification steel and common electric steel.

The rolling contact fatigue performance of ceramic balls with fine compact equal-axis grain and fewer glass phase exceeds that of those with slightness-needle grain and more glass phase.

The characteristics of wheel - rail rolling contact fatigue and causes of induced fatigue were reviewed.

Improving contact load is limited by contact fatigue strength of transmission parts.

The analysis on fatigue cracks of the outer race of aero-bearing shows that the distribution of residual tensile stress on race surface could reduce its contact fatigue life.

Spalling was a major form of contact fatigue failures in nitriding steel.

Based on the broken gear teeth in contact fatigue test, bending fatigue life curve was got by applying finite element stress analysis results, MSC.